Intermec CV41 User Manual page 77

DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
f Tap OK to save the Microsoft Security settings.
8 If you choose PEAP:
a Load a root certificate of the authentication server on your
computer. For help, see
b Tap OK to save the security settings and the User Logon dialog
box appears.
c Tap a User Name, Password, and Domain. Select Save
Password if you want to save the password for future
authentication sessions.
d Tap OK to save the Microsoft Security settings.
Enable WPA or WPA2 Personal (PSK) Security With Microsoft
Use the following procedure to enable WPA-PSK With Microsoft
Security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP for WPA and AES for
WPA2.
6 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the computer internally converts it to
a pre-shared key.
7 Save your settings.
Chapter 4 — Configure the Computer
"Load a Certificate" on page 66.
63