Update System Software Using Smartsystems Foundation - Intermec CV41 User Manual

Update System Software Using SmartSystems Foundation

DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
You can use the SmartSystems console to update the system software
on your CV41. The console is part of SmartSystems Foundation and is
available from the Intermec website. Before you can update your CV41,
you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to
the Downloads tab.
• the SSPB files you want to install. These SSPB files are available
from the Intermec website at www.intermec.com. Go to Support
> Downloads > OS/Firmware/Drivers list.
After you locate these items, you can update your CV41 using
SmartSystems Foundation.
1 Open the SmartSystems console.
2 Make sure the computer is discovered.
3 Make sure the computer is in the powered smart dock and that
power management is disabled.
4 Download the SmartSystems bundle to your PC.
5 Double-click the SmartSystems bundle on your PC to extract the
update files to the Software Vault.
6 From the SmartSystems console, locate the bundle to install and
drag them to each computer (or group in a folder) you want to
update. The SmartSystems console installs the update to your
computers.
Note: The SmartSystems console indicates that your computer is
offline by displaying a red stop symbol until the computer reboots and
connects to the system.
Chapter 3 — Manage the Computer
www.intermec.com/SmartSystems and click
37