About The Smart Dock; Attach The Cv41 To The Smart Dock - Intermec CV41 User Manual

Chapter 1 — About the Computer

About the Smart Dock

Attach the CV41 to the Smart Dock

DRAFT
6
The smart dock is secured to a forklift using a RAM mounting kit and
provides conditioned power to the CV41. The CV41 can then be
connected or removed from the smart dock at any time. With this
unique system, you can easily move the CV41 from one vehicle
equipped with the smart dock to another. The smart dock includes:
• a USB port
two COM ports
•
• a CANBUS/audio port
• strain relief cable mounts
To connect any accessory such as a tethered scanner, an audio headset,
or a USB flash drive, you need to purchase the correct accessory cables.
For more information, contact your local Intermec representative.
Make sure the smart dock is powered off before you connect any cables
to it.
Once you have secured the smart dock and connected it to power,
attach the CV41 to the smart dock.
1 Press and hold the Power button on the CV41 until the computer
turns off.
2 Locate the protruding lip on the rear of the CV41.
3 Place the lip of the CV41 over the top of the dock.
4 Slide the CV41 from side-to-side until the CV41 is seated into the
smart dock.
5 Push down onto the smart dock until you hear click.
6 If necessary, adjust the viewing angle by adjusting the pivot arm on
the RAM mount.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide