About The Touch Screen; Protect The Touch Screen; Calibrate The Screen - Intermec CV41 User Manual

About the Touch Screen

Protect the Touch Screen

Calibrate the Screen

DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
The CV41 comes with an 8-inch color touch screen display with a
resolution of 800 x 480 pixels. The display also comes with an optional
heater to reduce condensation on the external surface of the display
when moving between sub-freezing temperatures and normal
temperatures.
Apply the optional touch screen protective film to help protect the
screen from minor damage, scratches, and abrasions. Contact your
local Intermec representative to order protective film for your touch
screen.
1 Clean the touch screen from fingerprints, lint particles, dust, and
smudges. For more information, see
page 79.
2 Peel off the backing from the film to expose the adhesive.
3 Slide one edge of the film between the touch screen and display
housing.
4 Repeat Step 3 for the other three edges of the touch screen film.
You may need to calibrate your screen if you tap on one area and it
registers in a different area of the screen. Make sure you use the stylus
to complete the alignment process.
1 In the Windows Taskbar, tap the PM icon and select Control
Panel.
2 Select PenMount 6000 USB and tap Configure.
3 Tap one of the recalibration methods.
4 Follow the prompts on the screen to complete the alignment
process.
Chapter 1 — About the Computer
"Clean the Computer" on
17