Setup For Sg Series 225 & 300 Intended To Be Operated In Eboost™ Operation Mode - GE SG300 Installation Manual

3.8.7 Setup for SG Series 225 & 300 intended to be operated in eBoost™ Operation Mode
NOTE !
For systems intended to be operated in eBoost™ Operation Mode, the
installation shall be protected with suitable surge protection devices
(SPDs) on the AC bus feeding the UPSs.
Please contact your Service Center for more information.
When using the "eBoost/IEMi control" function on the programmable user
relays of the customer interface X1/J2 terminals in a Parallel System, a
separate NO (Normally Open) contact must be connected to each individual
unit.
Modifications reserved
OPM_SGS_ISG_M22_M30_2US_V010.doc
Page 30/40
Installation Guide SG Series 225 & 300 UL S2