Install Vent Plate - Valor RetroFire RF24JDN Installation Manual

Installation
Install Vent Plate to Appliance
Install either the co-llnear vent plate RA24CL or the
co-axial vent plate RA24CA.
Slide the chosen vent plate over the appliance's rear
cleat then secure to front flange with two screws.
Co-Linear Vent Plate RA24CL
22
Vent
plate
!
Cleat
IMPORTANT! When installing
vent plate, ensure rear edge of
plate is hooked to cleat!
NOTE
If the cavity where the appliance is to be installed
is small, you may want to secure the plate to the
liners first then slide the plate with liners attached
onto the appliance in the cavity—see next pages
for more information.
In all case, ensure the plate is hooked to the
cleat at the back of the appliance!
Co-Axial Vent Plate RA24CA

Install Vent Plate

Vent
plate
Cleat