Fitting The Closure Plate; Hearth Mounting - Valor Black Beauty Slimline Installation And Owner's Manual

6.4 Fitting the closure plate.

(See figure 9).
The closure plate has an opening at the
bottom for a central gas feed pipe. The
gap between the pipe and this opening
should be sealed with tape after
connection. If a central feed pipe is not
required the opening should be
completely sealed with tape.

6.4.1 Hearth mounting

(See figure 10).
The closure plate must be fitted and
sealed to the hearth and fireplace
opening using a suitable heat resistant
material. If necessary cut the closure
plate but make sure that it overlaps the
fireplace opening sufficiently to allow
satisfactory sealing.
©
GDC Group Ltd. JAN 2017
INSTALLER GUIDE
Figure 9. Closure plate.
Page 19
Figure 10. Closure plate for hearth
mounting.