Paper Jams/Pick Errors Occur Frequently - Fujitsu ScanPartner SP30 Operator's Manual

Image scanner
Table of Contents

Advertisement

Chapter 7 Troubleshooting

Paper jams/pick errors occur frequently.

Do the documents meet the requirements described in
"Precautions" in
"Conditions" (page
Yes
Is there any foreign matter inside the ADF?
No
Are the consumables (*1) installed correctly?
Yes
Are the consumables (*1) clean?
Yes
Are the consumables (*1) worn out?
No
*1: "Consumables" refers to the brake roller and the pick roller.
Use documents that meet the requirements.
42)?
For details, refer to
No
Clean or remove any foreign matter from the ADF.
For details, refer to
Yes
Install the consumables (*1) correctly.
For details, refer to
No
Clean the consumables (*1).
For details, refer to
No
Check the consumable counters and replace them if necessary.
For details, refer to
Yes
If the problem persists, check the items in
Service Provider" (page 112)
an authorized FUJITSU scanner service provider.
"2.3 Documents for Scanning" (page
"Chapter 5 Daily Care" (page
70).
"Chapter 6 Replacing the Consumables" (page
"Chapter 5 Daily Care" (page
70).
"Chapter 6 Replacing the Consumables" (page
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
Contents
Introduction
42).
Scanner
Overview
How to Load
Documents
How to Use the
80).
Operator Panel
Various Ways to
Scan
Daily Care
80).
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
TOP
Index
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scanpartner sp25Scanpartner sp30f

Table of Contents