Fujitsu ScanPartner SP30 Operator's Manual page 93

Chapter 7 Troubleshooting
■ Chip error
Check Power
indicator indicator
Flashes Flashes
3 times 3 times
■ Motor circuit error
Check Power
indicator indicator
Flashes Flashes
2 times 2 times
Flashes Flashes
6 times 6 times
■ Sensor error
Check Power
indicator indicator
Flashes Flashes
4 times 4 times
Item
LSI error Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
Item
Lamp circuit error Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and contact your
Motor circuit error
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
Item
Sensor error 1 Clear any dust around the ultrasonic sensors.
2 Turn the scanner off then back on.
Resolution
Resolution
Resolution
If the problem persists, write down the status of the indicators and contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
93