Scanning Documents Of Different Types And Sizes - Fujitsu ScanPartner SP30 Operator's Manual

Chapter 4 Various Ways to Scan

4.2 Scanning Documents of Different Types and Sizes

Documents with Different Widths
ATTENTION
When you scan a mixed batch with different widths, some of the smaller
documents may be skewed or not fed into the ADF. In that case,
separate the documents by their widths, and scan them in different
batches.
HINT
For more details about scanning a mixed batch of documents, refer to
"Conditions for Mixed Batch Scanning" (page
1
Align the top of the documents.
2
Place the documents at the center of the ADF paper chute
(feeder), and adjust the side guides to the widest
document in the batch.
For details, refer to "Chapter 2 How to Load Documents" (page
48).
38).
ATTENTION
Make sure that all documents are placed underneath the pick
roller. Otherwise, some documents may be skewed or not fed into
the ADF.
Pick roller's width
Pick roller's width
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Good
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Bad
Operational
Settings
TOP
Contents
Index
Introduction
Appendix
Glossary
57