Replacement Cycle Of Consumables [Life Counter Alarm Setting] - Fujitsu ScanPartner SP30 Operator's Manual

Chapter 8 Operational Settings
Replacement Cycle of Consumables [Life
Counter Alarm Setting]
The replacement cycle for each consumable can be specified.
The background color of the counter (in [Device Setting])
changes to light yellow when the page count after replacing
the consumable reaches 95% of the value specified here, and
turns yellow when it reaches 100%.
A message that prompts consumable replacement
also appears.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 116).
2
From the listing on the left, select [Device Setting 2]
[Life Counter Alarm Setting].
3
Specify a value as the replacement cycle.
The value can range from 10,000 to 2,550,000 sheets (in increments
of 10,000).
(page 130)
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
131