Download Table of Contents Print this page

Fujitsu ScanPartner SP30 Operator's Manual

Image scanner

Advertisement

Table of Contents
Operator's Guide
Thank you for purchasing our Color Image Scanner ScanPartner.
This manual explains about the basic operations and handling of the scanner.
For details about scanner installation and connections, refer to the Quick Installation Sheet.
P3PC-4772-02ENZ0
SP25/SP30/SP30F
Explains the names and functions of parts
and basic scanner operation.
Explains how to load documents on the
scanner.
Explains how to use the Operator Panel.
Explains about various ways of scanning.
Explains how to clean the scanner.
Explains how to replace the consumables.
Explains about troubleshooting.
Explains how to configure settings in the
Software Operation Panel.
How to Use This Manual
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu ScanPartner SP30

  • Page 1 P3PC-4772-02ENZ0 Contents Index SP25/SP30/SP30F Introduction Explains the names and functions of parts Scanner and basic scanner operation. Overview Operator's Guide Explains how to load documents on the How to Load scanner. Documents Explains how to use the Operator Panel. How to Use the Thank you for purchasing our Color Image Scanner ScanPartner.
  • Page 2 How to Use This Manual Contents How to Use This Manual Index Introduction Scanner The following shows the tips for using this manual. - Contents page Overview ® ® To display or print this manual, either Adobe Acrobat (7.0 or later) ®...
  • Page 3: Introduction

    Introduction Contents Introduction Index Introduction Scanner Thank you for purchasing our Color Image Scanner Manuals Overview ScanPartner. The following manuals are included for this product. Read About This Product them as needed. How to Load Documents "This product" refers to the Color Image Scanner ScanPartner. Manual Description Each scanner is equipped with an Automatic Document...
  • Page 4 Introduction Contents Trademarks Manufacturer Index Microsoft, Windows, Windows Server, Windows Vista, and PFU LIMITED Introduction Excel are either registered trademarks or trademarks of Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Microsoft Corporation in the United States and/or other Kawasaki, Kanagawa 212-8563, JAPAN. Scanner countries.
  • Page 5 Scan web page: http://imagescanner.fujitsu.com/scanpartner.html Daily Care If the solution to your problem cannot be found on the above web page, refer to the contact information for your Fujitsu Replacing the office on the following web page: Consumables http://imagescanner.fujitsu.com/warranty.html Contact for Purchasing Consumables or Cleaning...
  • Page 6 Conventions Contents Conventions Index Introduction Scanner Safety Information Abbreviations Used in This Manual Overview The attached "Safety Precautions" manual contains important The operating systems and products in this manual are information about the safe and correct use of this product. indicated as follows.
  • Page 7: Windows

    Conventions Contents Name Indication Name Indication Index ® Windows PaperStream IP (TWAIN) for ScanPartner PaperStream Windows Server 2012 Standard (64-bit) Introduction Server 2012 IP driver PaperStream IP (TWAIN x64) for ScanPartner (*1) Scanner PaperStream IP (ISIS) for ScanPartner ® Windows Overview Windows Server 2012 R2 Standard (64-bit)
  • Page 8 Conventions Contents Screen Examples in This Manual Index Microsoft product screenshots are reprinted with permission Introduction from Microsoft Corporation. The screen examples in this manual are subject to change Scanner without notice in the interest of product improvement. Overview If the actual displayed screen differs from the screen examples in this manual, operate by following the actual How to Load displayed screen while referring to the user's manual of the...
  • Page 9: Table Of Contents

    Contents Contents Contents Index Introduction Scanner How to Use This Manual ........................... 2 Overview Introduction ................................ 3 Conventions ............................... 6 How to Load Documents Chapter 1 Scanner Overview ........................15 Main Features ................................16 How to Use the Parts and Functions ..............................17 Operator Panel ScanPartner SP25/ScanPartner SP30...........................
  • Page 10 Contents Contents Bundled Software ................................ 35 1.10 Index Bundled Software Overview ............................35 Introduction System Requirements ..............................36 How to Install the Bundled Software ..........................37 Scanner Overview Chapter 2 How to Load Documents ......................38 Loading Documents in the ADF ..........................39 How to Load Preparation..................................
  • Page 11 Contents Contents Scanning Photographs and Clippings ..........................60 Index Long Page Scanning ..............................62 Introduction Scanning a Book (ScanPartner SP30F) ......................... 63 Scanning a Large Document on the Flatbed (ScanPartner SP30F) ................65 Scanner Advanced Scanning ..............................67 Overview Feeding Documents Manually in the ADF........................67 Customizing the Scanner Settings ..........................
  • Page 12 Contents Contents Chapter 7 Troubleshooting ........................... 87 Index Paper Jam ..................................88 Introduction Error Indications on Operator Panel ......................... 90 Temporary Errors ................................91 Scanner Device Errors.................................. 92 Overview Troubleshooting ................................94 How to Load Scanner cannot be powered ON............................ 95 Documents Scanning does not start..............................
  • Page 13 Contents Contents Chapter 8 Operational Settings ........................115 Index Starting Up the Software Operation Panel ......................116 Introduction Password Setting ..............................118 Setting a Password ..............................118 Scanner Setting [View Only mode] ............................. 119 Overview Clearing [View Only mode] ............................120 How to Load Changing the Password ...............................
  • Page 14 Contents Contents Waiting Time to Enter Power Saving Mode [Power saving] ..................144 Index Settings Related to Power ON/OFF ......................... 145 Introduction Method of Turning the Scanner ON/OFF [Power SW Control]..................145 Appendix ..............................146 Scanner Overview Basic Specification ..............................147 Installation Specifications ............................
  • Page 15 Contents Index Chapter 1 Scanner Overview Introduction Scanner Overview This chapter explains about the names and functions of the scanner components, as well as the methods for basic How to Load operations. Documents 1.1 Main Features.............................16 How to Use the Operator Panel 1.2 Parts and Functions............................17 1.3 Turning the Power ON/OFF........................24...
  • Page 16 Chapter 1 Scanner Overview Contents Index 1.1 Main Features Introduction This section explains about the main features of this product. Scanner The scanner is equipped with the following features: Overview High speed scanning Realizes a scanning speed of 25 ppm/50 ipm [ScanPartner SP25] (*1), How to Load or 30 ppm/60 ipm [ScanPartner SP30/ScanPartner SP30F] (*1).
  • Page 17: Scanpartner Sp25/Scanpartner Sp30

    Chapter 1 Scanner Overview Contents Index 1.2 Parts and Functions Introduction This section shows the names of the scanner parts. Scanner ScanPartner SP25/ScanPartner SP30 Overview ■Front How to Load Side guide Documents Guides the documents in the width ADF paper chute (feeder) direction as they are fed into the scanner.
  • Page 18 Chapter 1 Scanner Overview Contents ■Back Index Introduction Ventilation port Holes for ventilating hot air from inside the scanner. Scanner Overview USB connector Used to connect a USB cable. How to Load Documents Power connector How to Use the Used to connect the power cable. Operator Panel "Power cable"...
  • Page 19 Chapter 1 Scanner Overview Contents ■Removable Parts Index Pick roller Introduction Scanner Overview How to Load Documents How to Use the Operator Panel ADF paper chute (feeder) Various Ways to Scan Daily Care Replacing the Consumables Brake roller Troubleshooting Operational Settings Appendix Glossary...
  • Page 20 Chapter 1 Scanner Overview Contents ScanPartner SP30F Index ■Front Introduction Side guide Scanner Guides the documents in the width direction ADF paper chute (feeder) Overview as they are fed into the scanner. Holds the documents to be scanned. How to Load Chute extension 2 ADF (Automatic Document Feeder) Documents...
  • Page 21 Chapter 1 Scanner Overview Contents ■Inside Index Introduction Document cover Close it to hold the document in place. Scanner Overview How to Load Documents Document pad How to Use the Holds the document down against the document bed. Operator Panel Various Ways to Scan Daily Care...
  • Page 22 Chapter 1 Scanner Overview Contents ■Back Index Introduction Ventilation port Scanner Holes for ventilating hot air from inside the scanner. Overview USB connector How to Load Used to connect a USB cable. Documents Power connector How to Use the Used to connect the power cable. Operator Panel "Power cable"...
  • Page 23 Chapter 1 Scanner Overview Contents ■Removable Parts Index Document cover Pick roller Introduction Scanner Overview How to Load Documents How to Use the Operator Panel ADF paper chute (feeder) Various Ways to Scan Daily Care Replacing the Consumables Brake roller Troubleshooting Operational Settings...
  • Page 24: How To Turn The Power On

    Chapter 1 Scanner Overview Contents Index 1.3 Turning the Power ON/OFF Introduction How to Turn the Power OFF This section explains how to power on/off the scanner. Scanner HINT Overview You can select a method by which the scanner is powered on/off from Press the [Power] button on the operator panel for more one of the following: than 2 seconds.
  • Page 25: Opening/Closing The Adf

    Chapter 1 Scanner Overview Contents Index 1.4 Opening/Closing the ADF Introduction How to Close the ADF This section describes how to open and close the ADF. Scanner How to Open the ADF Overview Close the ADF. Push the center of the ADF until it locks in place. Remove all documents from the ADF paper chute How to Load (feeder).
  • Page 26: Opening/Closing The Document Cover (Scanpartner Sp30F)

    Chapter 1 Scanner Overview Contents Index 1.5 Opening/Closing the Document Cover (ScanPartner SP30F) Introduction How to Close the Document Cover This section describes how to open and close the document Scanner cover. Overview How to Open the Document Cover Gently close the document cover. How to Load Open the document cover.
  • Page 27 Chapter 1 Scanner Overview Contents Index 1.6 Setting Up the ADF Paper Chute (feeder) Introduction Documents loaded in the ADF paper chute (feeder) are fed Pull out chute extension 2. Scanner into the ADF one by one. Overview Using the chute extensions will keep the documents straight and feed them smoothly.
  • Page 28: Scanpartner Sp25/Scanpartner Sp30

    Chapter 1 Scanner Overview Contents Index 1.7 Setting Up the Stacker Introduction Documents loaded in the ADF paper chute (feeder) are Slide out stacker extension 1 towards you. Scanner ejected onto the stacker one by one. Overview Using the stacker and stacker extensions will keep the documents straight and stack them neatly.
  • Page 29 Chapter 1 Scanner Overview Contents ■A7 (landscape) or smaller Lift up stacker extension 2 towards you. Index Bring down the stacker from the top towards you. Introduction Scanner Overview How to Load Stacker Documents Stacker extension 2 How to Use the Operator Panel Various Ways to Scan...
  • Page 30: Scanpartner Sp30F

    Chapter 1 Scanner Overview Contents ScanPartner SP30F Lift up stacker extension 3. Index ■A5 (portrait) or larger Introduction Lift up the stacker towards you. Scanner Overview How to Load Documents Stacker extension 3 Stacker How to Use the Operator Panel Various Ways to Scan Daily Care...
  • Page 31 Chapter 1 Scanner Overview Contents ■A6 (portrait)/A5 (landscape) or smaller Index Lift up the stacker extension. Introduction Scanner Overview How to Load Stacker extension Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting ATTENTION Do not bend the stacker extension more than 90 degrees, because...
  • Page 32: Power Saving Mode

    Chapter 1 Scanner Overview Contents Index 1.8 Power Saving Mode Introduction Power saving mode keeps the power consumption low when Scanner the scanner has not been used for a certain period of time. ATTENTION Overview If the scanner is left powered on for 15 minutes without being The scanner may not enter power saving mode if there was a document remaining on the paper path.
  • Page 33 Chapter 1 Scanner Overview Contents Index 1.9 Basic Flow of Scanning Operation Introduction This section explains about the basic flow of performing a Turn on the scanner. Scanner For details, refer to "1.3 Turning the Power ON/OFF" (page 24). scan. Overview In order to perform a scan, you need a scanner driver and an Load a document in the ADF paper chute (feeder).
  • Page 34 Chapter 1 Scanner Overview Contents Scan the document with the image scanning application. Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan ATTENTION Do not unplug the USB cable or log off the user account when the scanner and the computer are communicating, for instance, during Daily Care scanning.
  • Page 35: Bundled Software Overview

    Chapter 1 Scanner Overview Contents Index 1.10 Bundled Software Introduction Bundled Software Overview Presto! PageManager This image scanning application supports PaperStream IP (TWAIN) Scanner for ScanPartner. It allows the easy scanning, sharing, and organizing The following software is bundled with this product. Overview of documents.
  • Page 36: Server

    Chapter 1 Scanner Overview Contents System Requirements Operating ® Windows 8 (32-bit/64-bit) (*2) Index system ® System requirements are described below. Windows 8 Pro (32-bit/64-bit) (*2) Introduction ® Windows 8 Enterprise (32-bit/64-bit) (*2) Operating ® Windows XP Home Edition (Service Pack 3 or ®...
  • Page 37 Chapter 1 Scanner Overview Contents How to Install the Bundled Software Click the [Install software] button. Index This section describes how to install the software included on Introduction the "Setup DVD-ROM". The following software can be installed: Scanner PaperStream IP (TWAIN) for ScanPartner Overview PaperStream IP (TWAIN x64) for ScanPartner PaperStream IP (ISIS) for ScanPartner...
  • Page 38 Contents Index Chapter 2 How to Load Documents Introduction Scanner Overview This chapter explains how to load documents on the scanner. How to Load Documents 2.1 Loading Documents in the ADF........................39 How to Use the 2.2 Loading Documents on the Flatbed (ScanPartner SP30F) ................41 Operator Panel 2.3 Documents for Scanning ..........................42 Various Ways to...
  • Page 39 Chapter 2 How to Load Documents Contents Index 2.1 Loading Documents in the ADF Introduction This section explains how to load documents in the ADF. Fan the documents. Scanner 1 Grab a stack of documents, which should be 5 mm or less. Preparation Overview 2 Hold both ends of the documents and fan them a few times.
  • Page 40 Chapter 2 How to Load Documents Contents How to Load Documents Adjust the side guides to the width of the document. Index Do not leave space between the side guides and the document. Otherwise, the document may be fed skewed. Introduction Pull out the chute extensions according to the length of the document.
  • Page 41 Chapter 2 How to Load Documents Contents Index 2.2 Loading Documents on the Flatbed (ScanPartner SP30F) Introduction Open the document cover. Close the document cover. Scanner For details, refer to "1.5 Opening/Closing the Document Cover For details, refer to "1.5 Opening/Closing the Document Cover Overview (ScanPartner SP30F)"...
  • Page 42: Paper Size

    Chapter 2 How to Load Documents Contents Index 2.3 Documents for Scanning Introduction Paper Size Conditions Scanner Overview The following paper sizes can be scanned: Paper type The following paper types are recommended: Maximum: A4 portrait (210 × 297 mm/8.3 × 11.7 in.), How to Load Wood-free paper legal (8.5 ×...
  • Page 43 Chapter 2 How to Load Documents Contents Precautions ATTENTION Index Since carbonless papers contain chemical substances that may The following types of documents may not be scanned successfully: harm the rollers (e.g. pick roller), take note of the following. Introduction Documents of non-uniform thickness (e.g.
  • Page 44 Chapter 2 How to Load Documents Contents ATTENTION HINT Index When you scan plastic cards, take note of the following. When scanning semi-transparent documents, increase the - Up to three plastic cards can be loaded in the ADF paper chute Introduction brightness for scanning to avoid bleed-through.
  • Page 45 Chapter 2 How to Load Documents Contents Loading Capacity Index The number of sheets that can be loaded in the ADF paper chute (feeder) is determined by the paper size and paper weight. See Introduction the graph below. Scanner A4/Letter or smaller Overview Legal How to Load...
  • Page 46 Chapter 2 How to Load Documents Contents Area Not to be Perforated HINT Index If there are any holes in the 35 mm-wide central column, you can move An error may occur when there are punched holes in the area the document to the left or right to avoid an error.
  • Page 47 Chapter 2 How to Load Documents Contents Fig. 1 HINT Index Accuracy of multifeed detection may drop with some documents. Multifeed cannot be detected for the top 30 mm of a document. Introduction Reference point For the shaded area in Fig. 1, you can also specify a length not to detect multifeeds in the Software Operation Panel.
  • Page 48 Chapter 2 How to Load Documents Contents Conditions for Mixed Batch Scanning Paper size Index When you scan a mixed batch with different sizes, not feeding the The following conditions apply when scanning a mixed batch documents straight may cause paper jams or part of the image to Introduction appear missing.
  • Page 49 Chapter 2 How to Load Documents Contents Combinations of standard paper sizes in a mixed batch Index Refer to the table below for a guideline of the range available for mixed batch scanning. Introduction However, note that not feeding the documents straight may cause paper jams or part of the image to appear missing. It is recommended to check the documents thoroughly before scanning and also check the image if the document was skewed.
  • Page 50 Chapter 2 How to Load Documents Contents Conditions for Automatic Page Size Detection *1: The following picture shows how to set the widest and the narrowest Index documents of the batch between the side guides. [Automatic Page Size Detection] does not work with the Maximum width Introduction following types of documents:...
  • Page 51 Chapter 2 How to Load Documents Contents Conditions for Using the Carrier Sheet document with the Carrier Sheet in high resolution. In that case, Index specify a lower resolution and try scanning again. Do not write on, color, stain, or cut the end with a black and white ■Paper size Introduction pattern on the Carrier Sheet.
  • Page 52 Contents Index Chapter 3 How to Use the Operator Introduction Panel Scanner Overview How to Load Documents This chapter explains how to use the operator panel. How to Use the Operator Panel 3.1 Operator Panel ............................53 Various Ways to Scan Daily Care Replacing the Consumables...
  • Page 53: Operator Panel

    Chapter 3 How to Use the Operator Panel Contents Index 3.1 Operator Panel Introduction The operator panel consists of buttons and indicators. Names and Functions Scanner Overview Check indicator How to Load Lights or flashes in orange when an error occurs. Documents Check How to Use the...
  • Page 54 [Scan/Stop] button is pressed. If this alarm occurs, turn the power off and then back on. If the problem persists after turning the power back on, contact your Appendix FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Glossary...
  • Page 55: Chapter 4 Various Ways To Scan

    Contents Index Chapter 4 Various Ways to Scan Introduction Scanner Overview This chapter explains how to configure scanner settings and scan different types of documents with the image scanning How to Load application. Documents 4.1 Summary ..............................56 How to Use the Operator Panel 4.2 Scanning Documents of Different Types and Sizes..................57 4.3 Advanced Scanning............................67...
  • Page 56: Summary

    Chapter 4 Various Ways to Scan Contents Index 4.1 Summary Introduction The following lists the main ways of scanning documents. Scanner Scanning documents of different types and sizes Overview "Documents with Different Widths" (page 57) "Documents Larger than A4/Letter Size" (page 58) How to Load "Scanning Photographs and Clippings"...
  • Page 57: Scanning Documents Of Different Types And Sizes

    Chapter 4 Various Ways to Scan Contents Index 4.2 Scanning Documents of Different Types and Sizes Introduction Documents with Different Widths ATTENTION Scanner Make sure that all documents are placed underneath the pick Overview roller. Otherwise, some documents may be skewed or not fed into ATTENTION the ADF.
  • Page 58 Chapter 4 Various Ways to Scan Contents Documents Larger than A4/Letter Size In the scanner driver, configure the scan settings to detect Index the paper size automatically. The Carrier Sheet can be used to scan documents larger than Introduction For details, refer to the scanner driver's Help. A4/Letter size, such as A3 and B4.
  • Page 59 Chapter 4 Various Ways to Scan Contents 2 Place the document inside the Carrier Sheet. Load the Carrier Sheet face-down in the ADF paper chute Index Align the fold line with the right edge of the Carrier Sheet so that the document fits in the upper right-hand corner.
  • Page 60 Chapter 4 Various Ways to Scan Contents Scanning Photographs and Clippings ATTENTION Index There may be a line or a gap appearing between the front and Using the Carrier Sheet allows you to scan documents that back side images. Introduction Also when you scan thick papers, images on both left and right can be damaged quite easily such as photographs, or may skew towards each other from the top.
  • Page 61 Chapter 4 Various Ways to Scan Contents Load the Carrier Sheet face-down in the ADF paper chute Index ATTENTION (feeder), as shown below. Introduction The image is output at the center of the page in the size Secure the Carrier Sheet with the side guides to avoid skewing. specified in [Paper Size].
  • Page 62 Chapter 4 Various Ways to Scan Contents Long Page Scanning - Removing Index Secure enough space around the stacker to prevent the Documents with a length up to 3,048 mm (120 in.) can be ejected sheet from falling off the stacker. Introduction scanned by long page scanning.
  • Page 63 Chapter 4 Various Ways to Scan Contents Scanning a Book (ScanPartner SP30F) Scan the document with the image scanning application. Index For details, refer to the manual of the image scanning application. Introduction Open the document cover. Scanner For details, refer to "1.5 Opening/Closing the Document Cover Overview (ScanPartner SP30F)"...
  • Page 64 Chapter 4 Various Ways to Scan Contents Load the document on the document bed. Close the document cover. Index Place the document face-down to align its top left-hand corner with For details, refer to "1.5 Opening/Closing the Document Cover Introduction the reference point.
  • Page 65 Chapter 4 Various Ways to Scan Contents Scanning a Large Document on the Flatbed Place the document face-down to align its top left-hand corner with Index the reference point. (ScanPartner SP30F) Introduction Reference point Scanner Open the document cover. Overview For details, refer to "1.5 Opening/Closing the Document Cover (ScanPartner SP30F)"...
  • Page 66 Chapter 4 Various Ways to Scan Contents Close the document cover. Index For details, refer to "1.5 Opening/Closing the Document Cover Introduction (ScanPartner SP30F)" (page 26). Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the...
  • Page 67: Feeding Documents Manually In The Adf

    Chapter 4 Various Ways to Scan Contents Index 4.3 Advanced Scanning Introduction Feeding Documents Manually in the ADF Scan the document with the image scanning application. Scanner For details, refer to the manual of the image scanning application. Overview Documents can also be loaded manually one sheet at a time After the document is scanned, the rollers inside the ADF keep in the ADF.
  • Page 68 Chapter 4 Various Ways to Scan Contents Index 4.4 Customizing the Scanner Settings Introduction Using a Button on the Scanner to Start Scanning Right-click on the scanner icon, and select [Scan Scanner properties] from the displayed menu. Overview The [Scan/Stop] button on the operator panel can be The properties dialog box of the scanner appears.
  • Page 69 Chapter 4 Various Ways to Scan Contents Scanner setup Select an action and an application to be launched by the Index scanner button event. Check Introduction Click [Start this program] under [Actions], and select an application from the drop-down list on the right. Scan Scanner /Stop...
  • Page 70 Contents Index Chapter 5 Daily Care Introduction Scanner Overview This chapter describes how to clean the scanner. How to Load Documents Do not use aerosol spray or spray that contains alcohol to clean the scanner. Dust blown up by strong air from the spray may How to Use the enter inside the scanner which may cause the scanner to fail or Operator Panel...
  • Page 71: Cleaning Materials

    For more information about the cleaning materials, contact How to Load Cleaner F1 PA03950-0352 100 ml your FUJITSU scanner dealer or an authorized FUJITSU Documents Moisten a cloth or Cleaning scanner service provider. Paper with this liquid to wipe the scanner clean.
  • Page 72 Chapter 5 Daily Care Contents Location and Frequency Index Introduction Location Frequency Scanner Brake roller Every 5,000 sheets Overview Pick roller Plastic idlerroller How to Load Documents Glass Ultrasonic sensor How to Use the Feed roller Operator Panel Eject roller Various Ways to Flatbed Document pad...
  • Page 73: Cleaning The Outside

    Chapter 5 Daily Care Contents Index 5.2 Cleaning the Outside Introduction For ScanPartner SP30F The outside of the scanner, including the ADF paper chute Scanner (feeder) and the stacker, should be cleaned with either a piece Overview of dry cloth, a cloth moistened with Cleaner F1/mild detergent, Cloth Cleaner F1 or a sheet of Cleaning Wipe.
  • Page 74: Cleaning The Inside

    Chapter 5 Daily Care Contents Index 5.3 Cleaning the Inside Introduction Cleaning the ADF (with Cleaning Paper) Load the Cleaning Paper in the ADF paper chute (feeder). Scanner Overview The ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.
  • Page 75 Chapter 5 Daily Care Contents Cleaning the ADF (with cloth) Clean the following locations with a cloth moistened with Index Cleaner F1 or a sheet of Cleaning Wipe. Glass ( The ADF can be cleaned with a piece of cloth moistened with ×...
  • Page 76 Chapter 5 Daily Care Contents Plastic idler roller (× 4) Index Gently wipe the surface of the rollers. Make sure that it is cleaned ATTENTION properly because residue on the roller will affect the feeding Introduction Make sure that the cloth does not get caught and damage the performance.
  • Page 77 Chapter 5 Daily Care Contents Ultrasonic sensor (× 2) Feed roller (× 2)/Eject roller (× 2) Index Gently wipe the dirt and dust off the surface of the ultrasonic sensors. The power must be turned on to rotate the feed/eject rollers. 1 Turn on the scanner.
  • Page 78 Chapter 5 Daily Care Contents Cleaning the Flatbed (ScanPartner SP30F) Close the ADF. Index For details, refer to "1.4 Opening/Closing the ADF" (page 25). The flatbed should be cleaned with a piece of cloth moistened Introduction Be careful not to have your fingers caught with Cleaner F1, or a sheet of Cleaning Wipe.
  • Page 79 After cleaning the inside, do not close the Carrier Sheet until it is completely dry. The Carrier Sheet should be replaced approximately every 500 scans. Replacing the For information on purchasing the Carrier Sheet, contact your Consumables FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix Glossary...
  • Page 80: Chapter 6 Replacing The Consumables

    Contents Index Chapter 6 Replacing the Introduction Consumables Scanner Overview How to Load Documents This chapter describes how to replace the consumables for the scanner. How to Use the Operator Panel The glasses inside the ADF become very hot when the scanner is being used.
  • Page 81 PA03540- 200,000 sheets or one year cleaned. 0002 Daily Care HINT Only use the specified consumables. Replacing the Consumables To purchase the consumables, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix Glossary...
  • Page 82 Chapter 6 Replacing the Consumables Contents Index 6.2 Replacing the Brake Roller Introduction Replace the brake roller in following procedure. 2 Lift the right side of the roller first, then pull out the shaft from the slot on the left. Scanner Overview Remove all documents from the ADF paper chute...
  • Page 83 Chapter 6 Replacing the Consumables Contents Attach the shaft. Index 1 Insert the left side of the shaft into the hole, and then attach the right side of the shaft. Introduction Scanner Overview Brake roller How to Load Documents Shaft How to Use the Operator Panel 2 Close the cover.
  • Page 84: Replacing The Pick Roller

    Chapter 6 Replacing the Consumables Contents Index 6.3 Replacing the Pick Roller Introduction Replace the pick roller in following procedure. Remove the pick roller. Scanner 1 Open the sheet guide by lifting the tab. Overview Remove all documents from the ADF paper chute (feeder).
  • Page 85 Chapter 6 Replacing the Consumables Contents 3 Lift the bushing first, then pull out the shaft. ATTENTION Index Lifting the retaining clip with your fingernail may hurt or damage your fingernail. Introduction Use a paper clip or something alike if you have trouble lifting it up. Scanner Overview Bushing...
  • Page 86 Chapter 6 Replacing the Consumables Contents Attach the shaft. Close the ADF. Index 1 Insert the right end of the shaft into the slot, and lower the other For details, refer to "1.4 Opening/Closing the ADF" (page 25). end gradually. Introduction Be careful not to have your fingers caught when closing the ADF.
  • Page 87: Chapter 7 Troubleshooting

    Contents Index Chapter 7 Troubleshooting Introduction Scanner Overview This chapter explains about the countermeasures against paper jams and other troubles, items to check before contacting How to Load your scanner service provider, and how to read the product labels on the scanner. Documents ATTENTION How to Use the...
  • Page 88: Paper Jam

    Chapter 7 Troubleshooting Contents Index 7.1 Paper Jam Introduction When your document is jammed inside the scanner, remove Remove the jammed document. Scanner the document in the following procedure. Overview Do not use force to pull out the jammed document, and make sure to open the ADF How to Load first.
  • Page 89 Chapter 7 Troubleshooting Contents Close the ADF. Index For details, refer to "1.4 Opening/Closing the ADF" (page 25). Introduction Be careful not to have your fingers caught when the ADF closes. Scanner Overview ATTENTION How to Load Confirm that the ADF is closed properly. Otherwise, the Documents document may not be fed into the ADF.
  • Page 90: Error Indications On Operator Panel

    Chapter 7 Troubleshooting Contents Index 7.2 Error Indications on Operator Panel Introduction When an error occurs during scanning, the operator panel If the Error Recovery Guide is installed in your computer, the Scanner indicators turn on as shown below. Error Recovery Guide window appears when the Windows Overview Temporary errors operating system is started up.
  • Page 91: Temporary Errors

    Chapter 7 Troubleshooting Contents Temporary Errors ■ Other errors Index The following are lists of temporary errors which can be Item Resolution Introduction recovered by operators. Transport lock error Unlock the transport lock switch. Scanner When a temporary error occurs, the Check indicator turns on. (ScanPartner SP30F) For details, refer to the Quick Overview...
  • Page 92: Device Errors

    Optical error (ADF Back) If the problem persists, write down the status of the indicators and contact your Operator Panel 3 times FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Flashes Turns on Flatbed motor malfunction 1 Confirm that the transport lock switch is not locked.
  • Page 93 Overview 3 times 3 times If the problem persists, write down the status of the indicators and contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. How to Load Documents ■ Motor circuit error How to Use the...
  • Page 94: Troubleshooting

    "There are black traces on the document." (page 108) Service Provider" (page 112), and then contact your FUJITSU Documents scanner dealer or an authorized FUJITSU scanner service "The Carrier Sheet is not fed smoothly. / Paper jams occur." (page 109) provider. How to Use the "Part of the image appears missing when using the Carrier Sheet."...
  • Page 95: Scanner Cannot Be Powered On

    Documents If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or How to Use the an authorized FUJITSU scanner service provider. Operator Panel Various Ways to...
  • Page 96: Scanning Does Not Start

    The scanner is operating correctly. Troubleshooting If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or Operational an authorized FUJITSU scanner service provider. Settings Appendix...
  • Page 97: Image Quality Is Poor When Scanning Pictures/Photos In Black & White

    If the problem persists, check the items in "7.4 Before You Contact the Scanner Operator Panel Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan *1: The scanned image may differ from the original image significantly if you simply "binarize" (output in black & white) a picture or a photo. If possible, use a scanner driver to configure grayscale or other scan settings that do not simply "binarize"...
  • Page 98: Quality Of Scanned Text Or Lines Is Unsatisfactory

    Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Replacing the Consumables *1: When scanning in grayscale or color, the scanned image may not become sharp and clear. If possible, use a scanner driver to configure the scan settings that simply "binarize"...
  • Page 99: Images Are Distorted Or Not Clear

    Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or Replacing the an authorized FUJITSU scanner service provider. Consumables Troubleshooting...
  • Page 100: Vertical Streaks Appear On The Scanned Image

    Various Ways to Scan If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Daily Care Replacing the Consumables...
  • Page 101: When The Scanner Is Turned On, The Check Indicator On The Operator Panel Turns On Or Flashes

    Operator Panel If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or Various Ways to an authorized FUJITSU scanner service provider. Scan Daily Care...
  • Page 102: Multifeed Error Occurs Frequently

    Chapter 7 Troubleshooting Contents Multifeed error occurs frequently. Index Introduction Do the documents meet the requirements described in Use documents that meet the requirements. "Precautions" in "Conditions" (page 42)? For details, refer to "2.3 Documents for Scanning" (page 42). Scanner Overview Are you using the Carrier Sheet? In the scanner driver, configure the scan settings for using the Carrier Sheet.
  • Page 103 If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. How to Use the Operator Panel *1: "Consumables" refers to the brake roller and the pick roller.
  • Page 104: Situation In Which The Document Is Not Fed Into The Adf Occurs Frequently

    If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting *1: "Consumables" refers to the brake roller and the pick roller.
  • Page 105: Paper Jams/Pick Errors Occur Frequently

    If the problem persists, check the items in "7.4 Before You Contact the Scanner Consumables Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting *1: "Consumables" refers to the brake roller and the pick roller.
  • Page 106: Scanned Images Turn Out Elongated

    Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Replacing the Consumables *1: "Consumables" refers to the brake roller and the pick roller.
  • Page 107: A Shadow Appears At The Top Or The Bottom Of The Scanned Image

    Various Ways to Scan If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Daily Care Replacing the Consumables...
  • Page 108: There Are Black Traces On The Document

    Operator Panel If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Daily Care...
  • Page 109: The Carrier Sheet Is Not Fed Smoothly. / Paper Jams Occur

    For details about cleaning, refer to "Chapter 5 Daily Care" (page 70). How to Use the Replace the Carrier Sheet. For information on purchasing the Carrier Sheet, contact your FUJITSU Operator Panel scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Did you start the scan after loading the Carrier Sheet in the Start the scan after loading the Carrier Sheet in the ADF paper chute (feeder).
  • Page 110 Overview If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or How to Load an authorized FUJITSU scanner service provider. Documents *1: "Consumables" refers to the brake roller and the pick roller.
  • Page 111: Part Of The Image Appears Missing When Using The Carrier Sheet

    Operator Panel If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 112) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Daily Care...
  • Page 112: Before You Contact The Scanner Service Provider

    Chapter 7 Troubleshooting Contents Index 7.4 Before You Contact the Scanner Service Provider Introduction Please check the following items before contacting your Scanner FUJITSU scanner dealer or an authorized FUJITSU scanner Overview service provider. General How to Load Documents Item...
  • Page 113: Error Status

    Chapter 7 Troubleshooting Contents Error Status ■ Image quality issues Index Item Findings ■ Computer connection issues Introduction Scanner driver and Item Findings version Scanner Operating system Overview Interface controller (Windows) Operating system Error message How to Load (Windows) Documents Interface Application Example: USB interface...
  • Page 114: Checking The Product Labels

    Chapter 7 Troubleshooting Contents Index 7.5 Checking the Product Labels Introduction This section explains about the product labels on the scanner. Label example: Shows the scanner information. Scanner Location Overview The location of the label is shown below. How to Load Documents How to Use the Operator Panel...
  • Page 115: Chapter 8 Operational Settings

    Contents Index Chapter 8 Operational Settings Introduction Scanner Overview This chapter explains how to use the Software Operation Panel to configure the scanner settings. How to Load Documents 8.1 Starting Up the Software Operation Panel....................116 How to Use the 8.2 Password Setting............................
  • Page 116: Starting Up The Software Operation Panel

    Chapter 8 Operational Settings Contents Index 8.1 Starting Up the Software Operation Panel Introduction The Software Operation Panel is installed together with the Display the Software Operation Panel. Scanner Windows XP/Windows Vista/Windows Server 2008/ PaperStream IP driver. Overview Windows 7 This application allows you to configure various settings such Select [Start] menu [All Programs]...
  • Page 117 Chapter 8 Operational Settings Contents The Software Operation Panel icon is displayed in the menu that Index appears when you click in the notification area. To have the Software Operation Panel icon always displayed in Introduction the notification area, drag the icon and drop it onto the notification area.
  • Page 118: Password Setting

    Chapter 8 Operational Settings Contents Index 8.2 Password Setting Introduction By setting a password, the Software Operation Panel can run Enter a new password then again to confirm, and click the Scanner [OK] button. in [View Only mode] which allows users to only view the Overview Up to 32 characters can be used for the password.
  • Page 119: Setting [View Only Mode]

    Chapter 8 Operational Settings Contents Setting [View Only mode] The Software Operation Panel enters the [View Only mode]. Index Set the Software Operation Panel to [View Only mode] in the Introduction following procedure. Scanner Overview Set a password. For details, refer to "Setting a Password"...
  • Page 120: Clearing [View Only Mode]

    Chapter 8 Operational Settings Contents Clearing [View Only mode] [View Only mode] is cleared, and the scanner settings can now be Index changed. Clear [View Only mode] in the following procedure. Introduction Right-click the Software Operation Panel icon in the Scanner notification area, and select [View Only mode] from the Overview...
  • Page 121: Changing The Password

    Chapter 8 Operational Settings Contents Changing the Password Enter a new password then again to confirm, and click the Index [OK] button. Up to 32 characters can be used for the password. Change the password in the following procedure. Introduction Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are Right-click the Software Operation Panel icon in the allowed.
  • Page 122: Clearing The Password

    Chapter 8 Operational Settings Contents Clearing the Password Leave both fields blank and click the [OK] button. Index Clear the password in the following procedure. Introduction Right-click the Software Operation Panel icon in the Scanner notification area, and select [Password Setting] from the Overview menu.
  • Page 123: Resetting The Password

    Chapter 8 Operational Settings Contents Resetting the Password Enter a new password then again to confirm, and click the Index [OK] button. Up to 32 characters can be used for the password. In case you forgot your password, it can be reset in the Introduction Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are following procedure.
  • Page 124: Configuration Items

    Chapter 8 Operational Settings Contents Index 8.3 Configuration Items Introduction The Software Operation Panel allows the configuration of the Scanner following settings for the scanner that is connected to the Overview computer. Device Setting How to Load Documents Start up the Software Operation Panel. How to Use the For details, refer to "8.1 Starting Up the Software Operation Panel"...
  • Page 125 Chapter 8 Operational Settings Contents Index Item Description Parameter/Value Factory Default Introduction Count Check the counters to determine when to replace Total Count (ADF)/Total Count(FB) (ScanPartner SP30F) / (page 129) the consumables. Brake Roller/Pick Roller Scanner Also use it to reset the counters after replacing Overview the consumables.
  • Page 126: Device Setting 2

    Chapter 8 Operational Settings Contents Device Setting 2 Index HINT Introduction The Software Operation Panel settings can be restored to the factory Start up the Software Operation Panel. default. For details, refer to "8.1 Starting Up the Software Operation Panel" To restore the settings to the factory default, click the [Default] Scanner (page...
  • Page 127 Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index Multifeed Specify a method for multifeed detection. Detect None / Check Overlapping (Ultrasonic) / None Introduction (page 138) multifeeds by monitoring the overlap, document Check Length / Check Overlapping and length, or the combination of both.
  • Page 128 Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index Document check area Selected range: Select this item to restrict the [Selected range] check box Not selected Introduction specification for Multifeed area to run multifeed detection. Detection Scanner Enable / Disable (Middle): Specify whether to Enable / Disable Disable (page 140)
  • Page 129: Settings Related To Sheet Counters

    Chapter 8 Operational Settings Contents Index 8.4 Settings Related to Sheet Counters Introduction Checking and Resetting the Sheet Counters In this dialog box, you can check the following items: Scanner Item Description Overview ■Checking the sheet counters Total Count (ADF) Approximate total number of sheets The status on each consumable part can be viewed to scanned through the ADF...
  • Page 130 Chapter 8 Operational Settings Contents ■Resetting the sheet counters ■Message for replacing the consumables Index When you have replaced or cleaned a consumable part, reset the The following message may appear while using the scanner. Introduction corresponding counter by using the following procedure. Message for replacing consumables Click the [Clear] button for the consumable that you Scanner...
  • Page 131: Replacement Cycle Of Consumables [Life Counter Alarm Setting]

    Chapter 8 Operational Settings Contents Replacement Cycle of Consumables [Life Specify a value as the replacement cycle. Index The value can range from 10,000 to 2,550,000 sheets (in increments Counter Alarm Setting] of 10,000). Introduction The replacement cycle for each consumable can be specified. Scanner The background color of the counter (in [Device Setting]) Overview...
  • Page 132: Settings Related To Scanning

    Chapter 8 Operational Settings Contents Index 8.5 Settings Related to Scanning Introduction Adjusting the Position to Start the Scan [Offset/ Adjust the level of offset/vertical magnification as needed. Scanner Vertical magnification Adjustment] Overview When the output position of the scanned image is not correct How to Load or the image appears shortened/elongated (vertically), adjust Documents...
  • Page 133: Removing Shadows/Streaks That Appear Around The Scanned Image Page Edge Filler (Adf)]/[Page Edge Filler (Fb)] (Scanpartner Sp30F)

    Chapter 8 Operational Settings Contents Removing Shadows/Streaks that Appear around Vertical Description Index the Scanned Image magnification Adjustment Introduction [Page Edge Filler (ADF)]/[Page Edge Filler (FB)] (ScanPartner SP30F) Unit Select [Flatbed] Scanner (ScanPartner SP30F) or [ADF] as the target for Overview vertical magnification adjustment.
  • Page 134 Chapter 8 Operational Settings Contents Specify the width of each margin to fill in: top/bottom/left/ HINT Index right. Depending on the value you specify, the bottom edge is filled in as follows: Introduction - 1 to 7 mm T: top = 0 to 15 mm Fills the margin in white, from the detected page bottom.
  • Page 135: Removing A Color From The Scanned Image [Dropout Color]

    Chapter 8 Operational Settings Contents Removing a Color from the Scanned Image Index [Dropout color] Introduction With "Dropout color", you can select either green, red, or blue Scanner (primary colors) to remove the details of the selected color Overview from a scanned image. For example, when a document with black characters and a How to Load green background is scanned, only the black characters of the...
  • Page 136: Shortening The Scanning Intervals [Pre-Pick]

    Chapter 8 Operational Settings Contents Shortening the Scanning Intervals [Pre-Pick] Select [Yes] or [No]. Index HINT "Pre-pick" refers to feeding the document to the starting Introduction If you cancel in the middle of scanning while pre-pick is position for scanning before the next scan. enabled, you will have to remove the pre-picked document, then load the document again.
  • Page 137: Number Of Paper Feeding Retries

    Chapter 8 Operational Settings Contents Number of Paper Feeding Retries Scanning at High Altitude [High Altitude Mode] Index Configure this setting to change the number of feeding retries Select whether to enable or disable high altitude mode. Introduction when a pick error occurs. Low atmospheric pressure at high altitudes may cause the Scanner accuracy of the multifeed detection for the ultrasonic sensor to...
  • Page 138: Settings Related To Multifeed Detection

    Chapter 8 Operational Settings Contents Index 8.6 Settings Related to Multifeed Detection Introduction Specifying a Multifeed Detection Method Scanner [Multifeed] Overview Multifeed is an error where two or more sheets are fed through How to Load the ADF at once. It is also called a multifeed when a different Documents document length is detected.
  • Page 139 Chapter 8 Operational Settings Contents Method Description ATTENTION Index To scan documents with different lengths, specify [Check Check Length Detects multifeed by the difference in length of the Overlapping (Ultrasonic)]. Introduction documents. When a photograph or a piece of paper is attached on the Note that multifeeds...
  • Page 140: Specifying The Area To Detect Multifeed [Document Check Area Specification For Multifeed Detection]

    Chapter 8 Operational Settings Contents Specifying the Area to Detect Multifeed Specify the detection range. Index [Document check area specification for Multifeed Range Description Introduction Detection] Selected range Select the check box to specify the detection range (colored in light blue) in the Scanner The following setting is only available when you specified picture below.
  • Page 141 Chapter 8 Operational Settings Contents Example 1: Range Description Index Position: Middle Displays the end position of the detection Introduction Selected range = Enable, Start = 50 mm, End = 200 mm (Middle) by the length from the leading edge of the document.
  • Page 142 Chapter 8 Operational Settings Contents Example 2: Example 3: (Bad example) Index Position: Middle Position: Middle Introduction Selected range = Enable, Start = 0 mm, End = 0 mm Selected range = Enable, Start = 100 mm, End = 102 mm Scanner Overview How to Load...
  • Page 143: Settings Related To Waiting Time

    Chapter 8 Operational Settings Contents Index 8.7 Settings Related to Waiting Time Introduction Waiting Time in Manual Feed Mode Specify whether to enable or disable [Manual-feed Scanner timeout]. [Manual-feed timeout] Overview If you selected [Enable], then also specify the time in [Paper-out detection time].
  • Page 144 Chapter 8 Operational Settings Contents Waiting Time to Enter Power Saving Mode [Power Index saving] Introduction The waiting time for the scanner to enter power saving mode Scanner can be specified. Overview Start up the Software Operation Panel. For details, refer to "8.1 Starting Up the Software Operation Panel"...
  • Page 145: Method Of Turning The Scanner On/Off [Power Sw Control]

    Chapter 8 Operational Settings Contents Index 8.8 Settings Related to Power ON/OFF Introduction Method of Turning the Scanner ON/OFF [Power Select one of the following: Scanner [Enable power switch] : Press the [Power] button on the operator SW Control] Overview panel.
  • Page 146 Contents Index Appendix Introduction Scanner Overview This appendix provides the following information. How to Load Documents A.1 Basic Specification ...........................147 How to Use the A.2 Installation Specifications .........................149 Operator Panel A.3 Outer Dimensions ............................150 A.4 Scanner Options ............................151 Various Ways to A.5 Uninstalling the Software .........................152 Scan Daily Care...
  • Page 147 Appendix Contents Index A.1 Basic Specification Introduction Scanner Item Specification Notes Overview ScanPartner SP25 ScanPartner SP30 ScanPartner SP30F How to Load Scanner type ADF + Flatbed Documents Image sensor Color CCD × 2 Color CCD × 2 Color CCD × 3 (front, back) (front, back) (front, back, flatbed)
  • Page 148 Appendix Contents Item Specification Notes Index ScanPartner SP25 ScanPartner SP30 ScanPartner SP30F Introduction Output Binary (black & white) 50 to 600 dpi, 1200 dpi 50 to 600 dpi, configurable in 1 dpi Scanner resolution increments Grayscale 1200 dpi: available from scanner Overview driver Color...
  • Page 149 Appendix Contents Index A.2 Installation Specifications Introduction Scanner Item Specification Overview ScanPartner SP25 ScanPartner SP30 ScanPartner SP30F How to Load Outer dimensions (W × D × H) (*1) 301 × 160 × 158 mm 301 × 160 × 158 mm 301 ×...
  • Page 150: Scanpartner Sp25/Scanpartner Sp30

    Appendix Contents Index A.3 Outer Dimensions Introduction The outer dimensions are as follows: Scanner ScanPartner SP25/ScanPartner SP30 Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan 160 (6.3) 301 (11.85) 327 (12.8) Unit: mm (in.) Daily Care ScanPartner SP30F Replacing the...
  • Page 151 Various Ways to However, replace it if damage or dirt is noticeable. Scan Daily Care For details about purchasing the scanner options and more information, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Replacing the Consumables...
  • Page 152 Appendix Contents Index A.5 Uninstalling the Software Introduction Turn on the computer, and log on as a user with If a confirmation message appears, click [OK] or [Yes]. Scanner administrator privileges. The software is uninstalled. Overview Exit all running software. Display the [Control Panel] dialog box.
  • Page 153 Glossary Contents Glossary Index Introduction Scanner Overview How to Load A4 size Edge Extract Landscape Resolution A5 size Documents Edge Processing Letter size A6 size Eject roller A7 size Error diffusion How to Use the A8 size Simplex scanning mode Operator Panel ADF (Automatic Document Moire patterns...
  • Page 154 Glossary Contents Index Introduction A4 size A standard paper size which is 210 × 297 mm (8.27 × 11.7 in.). Scanner Overview A5 size A standard paper size which is 148 × 210 mm (5.83 × 8.27 in.). How to Load Documents A6 size A standard paper size which is 105 ×...
  • Page 155 Glossary Contents Brightness Index Refers to the brightness of a scanned image. Introduction Scanner Overview Carrier Sheet A transparent plastic sheet designed for scanning documents that are larger than A4/ Letter size. How to Load Documents CCD (Charge-Coupled Device) Image Sensor A sensor which perceives the light reflected from the document and converts it into digital form.
  • Page 156 Glossary Contents Double Letter size Index A standard paper size used in the United States and other countries (17 × 11 in.). Introduction dpi (dots per inch) A measurement of resolution that is used for scanners and printers. Higher dpi indicates better resolution. Scanner Overview Duplex scanning mode...
  • Page 157 Glossary Contents Index Introduction Feed roller A roller that feeds the document through the ADF. Scanner Overview Filter Refers to the following types of processing on a scanned image. How to Load Digital Endorser: Documents Adds alphanumeric character strings on the scanned image data. How to Use the Page Edge Filler: Operator Panel...
  • Page 158 Glossary Contents Index Introduction Image processing Refers to processing and outputting the scanned image via specified scan parameters. Scanner Overview Interface The connection that allows communication between the computer and the scanner. How to Load Documents Inversion A scanning method in which the black part and the white part of the image are inverted. How to Use the ISIS Operator Panel...
  • Page 159 Glossary Contents Multifeed Index Multifeed is an error when two or more sheets are fed through the ADF at once. It is also called a multifeed when a different document length is detected. Introduction Scanner Overview Noise removal A function which improves the quality of an image by removing isolated noise that appear as black dots in a white area (or vice How to Load versa).
  • Page 160 Glossary Contents Pick start time Index The period of time between setting the document and until picking starts after the document passes the hopper empty sensor. Introduction Pixel The dots that make up a scanned image. Scanner Overview Portrait Orientation in which the long side of the document is set parallel to the feed direction. How to Load Documents/images are set/displayed vertically.
  • Page 161 Glossary Contents Threshold Index The value which is used to determine whether a certain color is black or white. Threshold value must be configured in order to scan images with grayscale gradation. Each pixel is converted into black or white according to the specified value. Introduction TWAIN Scanner...
  • Page 162 Index Contents Index Index Introduction Scanner Overview error indications.............. cleaning............... How to Load loading documents ............. Documents ADF paper chute (feeder) setup ........flatbed cleaning..............How to Use the loading documents ............. Operator Panel basic flow of scanning operation ........before you contact the scanner service provider..
  • Page 163 Index Contents Software Operation Panel ..........Index configuration items ........... Main Features..............Page Edge Filler............main features..............Introduction password..............manual feeding ............... Power SW Control............ mixed batch scanning............. Scanner specifications..............multifeed detection ............Overview scanner installation ..........stacker setup ..............How to Load operational settings ............
  • Page 164 Contents Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care ScanPartner SP25/SP30/SP30F Image Scanner Operator's Guide Replacing the Consumables P3PC-4772-02ENZ0 Issue Date: January 2014 Troubleshooting Issued by: PFU LIMITED Operational The contents of this manual are subject to change without notice.

This manual is also suitable for:

Scanpartner sp25Scanpartner sp30f

Table of Contents