Fujitsu ScanPartner SP30 Operator's Manual page 81

Chapter 6 Replacing the Consumables
6.1 Consumables and Replacement Cycles
The following table shows the consumables used for the
scanner.
Name Part No.
BRAKE ROLLER PA03540-
0001
PICK ROLLER PA03540-
0002
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables and
replace them before it reaches the end of the consumable life.
Suggested replacement
The scanner records the number of sheets scanned after
cycle
replacing the consumables (brake roller/pick roller), which
allows you to check the status on each consumable.
200,000 sheets or one year
For details, refer to
(page
Note that the suggested replacement cycles are guidelines for
using A4 (80 g/m
paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and
200,000 sheets or one year
cleaned.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
"8.4 Settings Related to Sheet Counters"
129).
2
[20 lb]) wood-free or wood-containing
HINT
Only use the specified consumables.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
81