Fujitsu ScanPartner SP30 Operator's Manual page 148

Image scanner
Table of Contents

Advertisement

Appendix
Item
Output
Binary (black & white)
resolution
Grayscale
Color
Grayscale level
Interface
Other
*1: Long page scanning supports documents with a length up to 3,048 mm (120 in.).
To scan documents longer than 863 mm (34 in.), set the resolution to 200 dpi or lower.
*2: The paper weight only applies to using the ADF. There is no limitation when using the flatbed.
*3: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*4: The capacity varies depending on the paper weight. For details, refer to
*5: Use the included USB cable.
When connecting to a USB hub, be sure to use a USB hub that is connected to a USB port on the computer.
Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when using USB 1.1.
Connect the USB cable with the USB logo facing up.
Specification
ScanPartner SP25
ScanPartner SP30
50 to 600 dpi, 1200 dpi
8-bit for each color
USB 2.0/1.1 (*5)
Hardware real-time JPEG compression
"2.3 Documents for Scanning" (page
ScanPartner SP30F
50 to 600 dpi, configurable in 1 dpi
increments
1200 dpi: available from scanner
driver
For internal processing, 10-bit for
each color
Type B
-
42).
TOP
Contents
Notes
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
148

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scanpartner sp25Scanpartner sp30f

Table of Contents