Table of Contents
Advertisement
Write error occurs and the print job halts
Check Point
Check Point
Is the printer switched on?
ON
Check the POWER/ERROR lamp to confirm that it is
lit. If the lamp is blinking green, the printer is warming
up. Wait until the lamp lights green and remains on.
• Printer does not switch on after pressing
Reference
POWER button
Check Point
Check Point
Are the printer and computer connected
securely?
If the printer cable connections on the printer and
computer are not tight, the printer will not operate
correctly. Check both connections and make sure that
they are tight.
• For details about connecting the printer and
Reference
computer, see the "Setup Guide".
Check Point
Check Point
Did a printer error occur?
When an error occurs, the POWER/ERROR lamp blinks
orange. Remove the cause of the error.
• POWER/ERROR lamp blinks orange
Reference
175
Contents
Chapter 6 Troubleshooting
Index
Advertisement
Table of Contents
