Canon S800 Reference Manual page 129

Printed area has shifted out of position, partially missing (cont.)
Check Point Check Point
Has enlarged/reduced printing been
executed?
If scaled printing has been set for
reduction...
If you have set up Scaled Printing to reduce the size
of the printed area and the paper loaded in the printer
is larger than the specified paper size for the print job,
the printed area will shift to the upper left corner of the
page. Select the correct paper size and load this size
paper in the printer to print the job at the reduced size.
If scaled printing has been set for
enlargement ...
When Scaled Printing is set for enlarging the printed
area, if the size of the paper loaded in the printer is
smaller than the correct setting, the printed area shifts
to the buttom right corner or right side of the page, or
is cut off at the bottom of the page. Make sure the
Page Size setting is set correctly after the rate of
enlargement is set for Scaling.
129
Contents
Chapter 6 Troubleshooting
Index