14 Photometer setup
14.2
Setting up the date and time
14.3
Performing a meter reset
It is possible to reset the photometer to its factory set-
tings (delivery state) in single steps. The reset total
resets all settings at once.
All AQA functions are retained when meter
setup is used.
See section 9.1.6 for AQA reset.
100
→ Call up the set date/time menu item.
→ Input the date via the numeric keypad
→ Confirm with
.
→ Input the time via the numeric keypad
→ Confirm with
.
→ Call up the menu item, reset
Select between
total
Erase the measured value store and reset the set-
tings to the delivery state
meas. storage
Erase the measured value storage
setup
Reset all the settings to the delivery state.