Table of Contents
Advertisement
10 Special functions
Example:
Setting to manual scaling of the axes, changing the
coordinate limits to the wavelength range 400 nm to
800 nm (default 330 nm to 850 nm) and absorbance
range 0.000 A to 2.000 A (default 0.000 A to 2.500 A).
68
graphic parameters submenu:
→ Confirm unit A with
→ Use
or
→ Confirm with
.
→ Input the coordinate limits required for both axes
via the numeric keypad
→ Confirm each time using
The graphic parameters are stored.
The meter returns to the spectrum menu.
Erasing the graphic parameters:
change the measuring mode
switch off the photometer
overwrite or set to auto.
to select manual scaling
.
Advertisement
Table of Contents
