Table of Contents
Advertisement
3.2
Switching on the photometer
after 15 minutes:
3 Commissioning
→ To switch on the photometer, open the cover.
→ Insert the cards with the analysis specifications
into the compartment in the cover. To do so, pull
out the transparent lid, insert the cards and push
the lid back again.
The 15 minutes warm-up time of the photometer runs.
The clock shows the countdown so that the remaining
warm-up time is displayed. The meter always requires
this warm-up time, even if it has only been switched
off for a brief period.
Self-check of the photometer: The photometer per-
forms a check (SelfCheck, including AutoCheck) of
the entire system and then switches automatically to
the concentration measuring mode.
19
Advertisement
Table of Contents
