Table of Contents
Advertisement
4 Short manual
4.2
Checking the system (AQA2)
or
After the measurement is finished:
22
→ Place the AQA MemoChip in the recess on the
The action of placing the AQA MemoChip in the re-
cess directly activates the AQA check without having
to press any key.
→ Insert a cell with the prepared standard solution
The photometer reads the barcode, identifies the
method and performs the AQA check.
+
photometer. The following display appears:
that is ready to be measured (e. g. using the
Spectroquant® CombiCheck).
Standard concentrations ready to use
and tolerances are listed in the table
S
® C
PECTROQUANT
S
TANDARD SOLUTIONS
this operating manual, General informa-
tion.
C
OMBI
HECK AND
in the first part of
Advertisement
Table of Contents
