Table of Contents
Advertisement
13. Meter Setup
13.2 Setting the date/time
13.3 Reset
It is possible to reset the photometer to its factory
settings (delivery state) in single steps. The reset total
function resets all settings and blank values at once.
Example: Performing a total reset
– Call up the set date/time menu item.
– Input the date via the numeric keypad
1
– Confirm with
– Input the time via the numeric keypad
1
– Confirm with
.
All AQA functions are retained when meter
setup is used.
See section 8.1.6 for AQA reset.
– Call up the reset menu item.
Select between
l
total
Erase the measured value storage and reset the
settings to the delivery state
l
meas. storage
Erase the measured value storage
l
setup
Reset all settings to the delivery state.
– Select the reset menu item
1
– Confirm with
.
A meter reset is performed (measured value memory
and setup).
61
Advertisement
Chapters
Table of Contents
