Performing Total System Monitoring - wtw PhotoLab Spektral Operating Instructions Manual

9.3.4

Performing total system monitoring

AQA entry
Using AQA MemoChip...
→ Insert the AQA MemoChip.
or
After the measurement is finished:
AQA check OK ...
9 Analytical Quality Assurance (AQA)
...or via a menu
→ In the setup menu, call up the AQA check sub-
menu.
→ Call up the system submenu.
→ Insert a cell with the prepared standard solution
that is ready to be measured (e. g. using the
Spectroquant
reads the barcode, identifies the method and per-
forms the AQA check.
→ Insert the reference cell.
...or error message
→ Repeat the check
→ If the error is repeated, perform troubleshooting of
the error.
See
General information of this operating manual.
®
CombiCheck). The photometer
A Q A
NALYTICAL UALITY
in part 1
SSURANCE
65