wtw PhotoLab Spektral Operating Instructions Manual page 62

7 Documentation
7.2 Activating the ID number
If the ID number function is active, a sequence of up
to 6 alphanumeric characters (ID number) is allocated
to a measurement (e. g. sample location, customer
number, river kilometer). The ID number is stored and
saved together with the corresponding measured
value.
32
yes
The numbering of the measured values begins at
000 again (default)
no
Consecutive numbering of the measured values
(from 000 to 999)
→ Select the menu item:
Press or
→ Confirm with
.
Call up the ID number submenu.
→ Select the menu item:
Press or
→ Confirm with
.
off
It is not possible to enter an ID number
(default).
on
Input an ID number for each measured value.
→ Select the menu item, on, by pressing
→ Confirm with
.