wtw PhotoLab Spektral Operating Instructions Manual page 63

Measuring using the activated "ID number" function
The following display appears:
7 Documentation
→ Call up the concentration measuring mode by
pressing
→ Insert the round cell and align it.
or
→ Insert the AutoSelector and rectangular cell.
→ Input the required ID number
Default:
The ID number that was last entered
(initially, it is underscores).
The input is made as follows:
→ Capital letters using
→ Numerals via the numeric keypad or using
→ Confirm the input using
Confirming the input without entering any charac-
ters terminates the input.
The measurement starts after the input is finished.
The ID number appears in the documentation only.
To erase incorrect inputs:
→ Pressing
moves the cursor (black rectangle)
one digit back. This digit can be input once more
and thus corrected.
.
33