Part Specification" Tab; Control Group "Pressure/Temperature Dependency - Siemens COMOS Operating Manual

"Norm description" control group
Description
"Technical norm"
"Company standard"
"NSys"
"Geometry description" control group
Control element
"PN"
See also
Change DisplayValue() (Page 149)
3.5.7

"Part specification" tab

The control elements that are not self-explanatory are described below.
See also
Change DisplayValue() (Page 149)
3.5.7.1

Control group "Pressure/temperature dependency"

Purpose
The table stores the information on the temperature at which nominal pressure is allowed for
a pipe part.
The values entered here are evaluated on the "Chart" tab in the PipeSpec Designer and
displayed in a diagram. See also chapter "Chart" tab (Page 108).
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Preparing for creation and maintenance of pipe specs
Function
● Dependent on the system of standards
● Refers to a company standard.
● Displays the selected system of standards
● Linked to the "Y00T00060.Y00A00038 NSys" attribute
Description
● Script block "OnChange()":
Purpose: Forwarding of a new nominal pressure to the
"Y00T00050AA01.Y00A00090 Nominal pressure" attribute
3.5 Administering pipe part catalogs
45