Control Group "Materials - List Of Objects; Control Group "Technical Terms Of Delivery - Siemens COMOS Operating Manual

Preparing for creation and maintenance of pipe specs
3.5 Administering pipe part catalogs
Attributes
Pressure range
Temperature range
3.5.7.2 Control group "Materials – List of objects"
Attributes
Control element
"Material"
"NSys"
"Position"
See also
Change DisplayValue() (Page 149)
3.5.7.3

Control group "Technical Terms of Delivery"

Attributes
Control element
"Standard"
"No."
46
"Minimum"
Nominal pressure
Minimum temperature at
which the associated nominal
pressure remains constant.
Description
Script block "OnChange":
● Purpose: Sets the material number depending on the material and adds the
material to the Navigator description.
● See also chapter Navigator description from pipe part attributes (Page 150).
● Defines the system of standards for the component
● Controls all the component's attributes that are dependent on the system of
standards.
● Registered as dependent attributes: "VS001", "VS002"
Table in which the individual parts of the pipe part are described.
Description
The standard for the technical terms of delivery, depending on the sys‐
tem of standards
Table in which the individual parts of the pipe part are described with
regard to their technical terms of delivery.
"Maximum"
Nominal pressure
Here, the same value as
shown in the "Minimum" col‐
umn must be entered.
Maximum temperature at
which the associated nominal
pressure remains constant.
Operating Manual, 09/2014, A5E32076948-AA
"<1-6>"
Permissible nominal pres‐
sure for the specified temper‐
ature values
Selected temperature values
PipeSpec Designer