"Error analysis for 3D objects" plugin
12.5 Nominal-diameter-dependent check of the geometry
Procedure
1. Open the node of the required object in the results table on the "Bulk analysis" tab.
2. Click with the left mouse button on the nominal diameter for which you want to start the
detail analysis.
3. Select "Check values" from the context menu.
– The "Detail evaluation" tab opens.
– The settings for pipe spec and nominal diameter of the object to be analyzed are applied.
4. Click the "Calculate" button to start the evaluation.
144
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA