Display For Nominal Diameter Range" Tab - Siemens COMOS Operating Manual

"General connection information" control group
Control element
"Nominal pressure"
"Nominal diameter"
"Connection type"
"Attachment type"
Component-specific control groups
Some geometry-relevant attributes are calculated using formulas that take values from the
standard geometry tables. You can edit these attributes by placing the cursor in the field and
pressing <F2> on your keyboard. See also chapter Determining the component geometry of
a pipe part (Page 28).
3.5.18

"Display for nominal diameter range" tab

Here you restrict the nominal diameter range of the pipe part.
User interface reference
The tab contains the following elements:
● A table displaying the nominal diameter range of the pipe part
– The table is based on an object query. See also chapter Display nominal diameter
– It contains all nominal diameters sizes from the nominal diameter range of the pipe part.
– A table cell is displayed with a white background if the nominal diameter for the pipe
– An option in the white table cells determines whether the nominal diameter belongs to
● The "Refresh" button
– It recalculates the nominal diameters listed in the table. See also chapter New
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Description
● Defines the nominal pressure.
● Linked with the "Y00T00059.Y00A00090 PN" attribute.
● Defines the nominal diameter.
● Linked with the "Y00T00011.Y00A00003AA01 Nominal diameter 1"
attribute
● For flanged pipe parts only.
● List in which the type of bolted connection of the pipe part is defined and
thus the algorithm for calculating the bolt length.
Used to automatically generate predefined mounting parts on isometries and
bills of material during construction. See also chapter "Fastening table" tab
(Page 105).
range (Page 40).
The nominal diameters for which COMOS cannot determine the parameters required
for calculation of the component geometry are excluded.
part is permitted, and in gray if it is not.
the nominal diameter range of the pipe part.
You can limit the nominal diameter range of the pipe part. See also chapter Restricting
the nominal diameter range of a pipe part (Page 42).
calculation of the nominal diameter range (Page 41).
Preparing for creation and maintenance of pipe specs
3.5 Administering pipe part catalogs
53