Database Reference; Bolted Types - Siemens COMOS Operating Manual

Database reference

13.1

Bolted types

Standard table for bolted types
"Standard tables > Y10 > M23 > A20 > Y10M23N00028 Bolted types"
Bolt type
Normal bolted connection
Blind hole bolted connection
Normal and blind hole bolted con‐
nection
Clamp bolted connection
Normal bolted connection
Normal bolted connection is used as standard.
Different types of bolts can be used for a normal bolted connection, e.g. screw bolts with two
nuts.
Example: DIN 601, ISO 4016***
Hexagon bolt Mxx
1 x nut Mxx
Optional: 2 x washers
Blind hole bolted connection
Blind hole bolted connections are used when flange plates have blind holes. This means that
the bolt cannot be pushed through. Different types of bolts can be used, e.g. hexagon bolts
(without nuts), stud bolts (with nut).
Example:
Stud bolt Mxx
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Description of the standard table entry "Value 1" of the standard
"Normal"
"Threaded blind hole"
"Threaded hole"
"Cycle (wafer type)"
13
table entry
"1"
"2"
"3"
"4"
145