Example Report For Pipe Part Documentation; Pipe Parts In The Pipe Part Catalog; Tabs And Attributes; Change Displayvalue() - Siemens COMOS Operating Manual

13.4

Example report for pipe part documentation

The database contains a preconfigured example report documenting the pipe spec elements.
The report was created at the following node from where it is inherited to all base objects of
the pipe spec elements:
"@10 > A20 > A20 > A10 > A10 DA 001 Component documentation"
13.5

Pipe parts in the pipe part catalog

13.5.1

Tabs and attributes

Administering pipe part catalogs (Page 27) contains an overview of the tabs and attributes of
the pipe parts from the pipe part catalog and how they are configured.
13.5.2

Change DisplayValue()

Requirement
An attribute of the pipe part has been saved with a standard table.
Principle
When you click on the button next to the attribute to view the list of possible values, you see
the description of the standard table entries.
To display a different description for a standard table entry, change the DisplayValue.
Use the text from "Value 3" of the standard tables. Use the implementation of the
"GetDisplayValue()" script block described below for this purpose.
When you expand the list you continue to see the description.
Implementation of the "GetDisplayValue()" script block
Properties of the attribute, "Scripts" tab, "GetDisplayValue()" script block: Apply database
implementation.
Example attribute with this type of implementation:
"Y00A04970 Type of fastening"
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Database reference
13.5 Pipe parts in the pipe part catalog
149