P&Id Objects; Overview: Data Flow Between P&Id Object And Pipe Part Catalog Implementation - Siemens COMOS Operating Manual

Database reference
13.6 P&ID objects
13.6 P&ID objects
This chapter contains information about the properties and scripts of P&ID objects that is
important in connection with pipe specs and the link between the pipe part catalog and the
P&ID catalog.
The P&ID objects are preconfigured accordingly in the database.
You can find additional information on this topic in the "P&ID Operation" manual, keyword
"Overview of P&ID objects".
13.6.1 Overview: Data flow between P&ID object and pipe part catalog implementation
Application area
Interaction between P&ID, pipe part catalog, and 3D.
Data flow
The following table provides an overview of data flow between the P&ID object and pipe part
catalog implementation. The data is forwarded via static links:
Pipe spec element
Pipe section
P&ID object
Object from pipe part cat‐
alog
Pipe spec element
Pipe section
P&ID object
Object from pipe part catalog
152
Pipe spec
"Y00T00003.Y00A00052"
""Y00T00003.Y00A00052"
"Y00T00011.Y00A00052"
Nominal diameter 1
"Y00T00003.Y00A00744"
"Y00T00003.Y00A00744"
"Y00T00011.Y00A00003AA01"
Nominal pressure
"Y00T00050AA01.Y00A00090"
"Y00T00003.Y00A00746"
Nominal diameter 2
"Y00T00003.Y00A00744AA02"
"Y00T00003.Y00A00744AA02"
"Y00T00011.Y00A00003AA02"
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA