Requirement
You have selected the "S(...)" function in the "Function" field of the "Define catalog access"
window.
Procedure
1. "Specification" field: Click the "..." button next to the field.
The "Attribute selection" window opens. You see the base object of the pipe part and its
tabs.
2. Select the required attribute and click the "OK" button.
3. In the "Define catalog access" window, click the "OK" button.
3.5.2.9
Using the "ElmS(...)" function
Functional principle of "ElmS(...)"
The "ElmS(...)" function uses the value from an attribute of a pipe part element as the
dimension.
Requirement
You have selected the "ElmS(...)" function in the "Function" field of the "Define catalog access"
window.
Procedure
1. "Element" field: Click the "..." button next to the field.
The "Element selection" window opens. You see the base object of the pipe part and the
subordinate elements.
2. Select the required element and click the "OK" button.
3. "Specification" field: Click the "..." button next to the field.
The "Attribute selection" window opens. You see the base object of the element and its
tabs and attributes.
4. Select the required attribute.
5. In the "Define catalog access" window, click the "OK" button.
See also
Using the "S(...)" function (Page 36)
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
Preparing for creation and maintenance of pipe specs
3.5 Administering pipe part catalogs
37