Emotiva RMC-1 Preliminary page 81

Rear Panel - Ethernet and USB Update Ports
FM AM
ANALOG IN BALANCED ANALOG IN
1
R L
2
R
R L
RMC-1
3
RRHt RFHt RBk RSur
1. Ethernet Connection
The RMC-1's Ethernet connection is used to connect the RMC-1 to the Internet via your home
network. A network connection is required in order to configure Dirac Live automatic room
correction, and to allow Ethernet-based or Internet-based remote control apps to connect to the
RMC-1 .
Note: A network connection with an Internet connection is required for configuring Dirac Live
but, once Dirac is configured, the RMC-1 does NOT need to remain connected to the Internet -
or to your local network - to operate.
Note: The RMC-1 currently does NOT have the ability to play audio or video sources via the
Ethernet input.
2. Rear Panel USB Input
The front panel and rear panel USB data inputs are used to apply firmware updates to the RMC-1
via a standard USB stick (thumb drive). This input duplicates the function of the front panel USB
update input.
Connecting the RMC-1
HDMI
8 7 6 5
DIGITAL OUT DIGITAL IN
4 3
L
RWid RF CTR LF
4 3 2
AES/EBU IN
2 1
ZONE2 OUT
LWid LSur LBk LFHt
NETWORK
Page 75
HDMI
1 1 2/ARC
NETWORK IR IN TRIGGER OUT
1 2
3 4
IR OUT
LRHt RSub/Ht CSub LSub/Ht
1
2