Emotiva RMC-1 Preliminary page 37

Main Menu
Information
Screen
Note: Information displayed on this screen is read-only. The RMC-1's Network information and
Friendly Name can be changed from the Setup Menu if desired.
Note: The Menu screen may appear on either the Left Screen or Right Screen, depending on
how your RMC-1 is configured.
Main Zone (menu)
The Main Zone menu provides the controls used to operate the RMC-1's main listening zone in
day-to-day use, including Input and Mode selection and the Tone and Level Trims.
Note: Trim adjustments made in the Main Zone menu are temporary and are not saved when
the RMC-1 is shut down. To make permanent adjustments, use the Setup menu
Zone 2 (menu)
The Zone 2 menu provides the controls used to operate the RMC-1's second listening zone in day-
to-day use.
The RMC-1 Menu System
Tuner
(menu)
Setup
(menu)
Information
(menu)
Main Zone
(menu)
Zone 2
(menu)
The RMC-1 Menu System is displayed by pressing
the Menu button, and is displayed on the RMC-1's
front panel display and the on-screen display. The
Menu System is divided into five major functional
categories.
Tuner (menu)
The Tuner menu provides the controls used to
operate the RMC-1's built-in high quality AM/FM
tuner. Station Presets and Station Names are also
configured from this menu.
Setup (menu)
The Setup menu provides all the controls used to
configure the RMC-1's various features and settings.
These will be covered in detail in the Setup Menu
section.
Information (menu)
The Information menu displays information about
the RMC-1's Network Address and about the
currently installed versions of the RMC-1's various
firmware modules.
Page 31