Table of Contents
Advertisement
The RMC-1 Menu System
Restore Settings
Selecting Restore Settings instructs the RMC-1 to retrieve a stored copy of its configuration file
and apply the stored configuration. After selecting Restore Settings you will be prompted to
Confirm your choice.
Note: If a USB stick is inserted in the XMC-1, the configuration stored there will be used. If no
USB stick is inserted, or no external configuration file is present, then the configuration that is
stored internally will be used.
Tuner Region
The Tuner Region setting is used to configure the tuner in the RMC-1 to comply with the correct
channel frequency spacing for your region. You may select either Americas or Europe/Asia.
Setup Lock
Setup Lock is used to prevent the RMC-1's configuration settings from being inadvertently
changed.
Selecting None will leave all configuration settings unlocked. This is the normal default
configuration.
Selecting Advanced locks the Setup Advanced Menu - which will then no longer appear on the
Setup Menu. This prevents anyone from inadvertently changing any settings on the Setup
Advanced Menu, which include resetting the RMC-1 to factory defaults.
Selecting All locks the entire Setup Menu.
Note: If you lock the entire Setup Menu - by selecting All, or just the Setup Advanced Menu - by
selecting Advanced, you will no longer have access to the Setup Advanced Menu, which will
prevent you from changing the lock settings. This will prevent you from unlocking the menus.
If you find yourself in this situation, you may still access the Setup Advanced Menu directly
by pressing the Standy button on the front panel WHILE PRESSING AND HOLDING THE FRONT
PANEL ENCODER KNOB IN.
Front Buttons
Check this box to disable all front panel controls.
Note: This feature is intended to prevent settings on the RMC-1 from being inadvertently
changed (and also acts as a "child lock"). If you accidentally become locked out of the RMC-1 by
disabling all controls, including the remote control, you can override this feature and access the
Setup Advanced Menu by pressing the Standy button on the front panel WHILE PRESSING AND
HOLDING THE FRONT PANEL ENCODER KNOB IN.
This will allow you to enter the Setup Advanced Menu and re-enable the controls.
Page 51
Hide quick links:
Advertisement
Table of Contents
