Emotiva RMC-1 Preliminary page 27

Operating the RMC-1
Using the RMC-1 Tuner
The RMC-1 includes a high-quality AM/FM tuner, which can play all standard content from
terrestrial radio stations. The RMC-1's tuner plays standard FM broadcasts (but not "digital" or
"HD" radio broadcasts).
The RMC-1's display will show station or program identification information that is received via the
RBDS data system used by many FM stations.
Note: The Name field, which can be configured for each station that is entered as a preset, is
manually entered by the user, and is NOT derived from the RBDS information.
Pressing the Tuner direct input button on the remote control will select the Tuner as the active
input. Once the Tuner is your selected Input, you can use the direct control buttons on the remote
control to move between stations or radio bands.
The AM/FM Button can be used to switch between the AM and FM radio bands.
The Station Up and Station Down buttons can be used to move directly to the next/last
configured station preset.
The Seek Up and Seek Down buttons can be used to instruct the RMC-1 to seek in the chosen
direction for the next available station with sufficient signal strength to provide acceptable
listening quality.
The Tune Up and Tune Down buttons can be used to instruct the RMC-1 to move up or down to
the next station frequency increment.
Note: The Tune buttons allow you to "manually" shift the frequency up or down to the next
valid location for a station - whether any station is currently broadcasting at that frequency
with sufficient strength for the RMC-1 to tune it or not. This is equivalent to manually turning
a tuning dial, and can be used to configure preset stations that are too weak for the RMC-1 to
detect automatically, or to configure preset stations that are not currently on the air.
Page 21