Emotiva RMC-1 Preliminary page 39

Information Menu
Information
(menu)
The RMC-1 Menu System
Friendly
Name
Network
MAC
Address
Firmware
Version
FP
Version
Kernel
Version
HDMI
Version
CPLD
Version
DSP0
Version
DSP1
Version
USB
Version
The Information Menu gives you access
to information about the current Network
configuration of the RMC-1, shows the versions of
the currently installed firmware modules, and allows
you to see the RMC-1's Friendly Name.
The information displayed on this screen is
configured from other screens in the Setup Menu
and cannot be changed from this screen.
Friendly Name
The Friendly Name is used by various remote control
applications to identify the RMC-1 (the default is
"RMC-1").
Network
The Network Address is the IP address assigned
to your RMC-1. If the RMC-1 is configured to use
DHCP, then this address is set by your DHCP server;
otherwise it may be entered manually. A valid
Network Address is required to configure Dirac Live,
and to control the RMC-1 using a network attached
remote control. If your RMC-1 isn't connected to a
network this address may show as 0.0.0.0 (none).
MAC Address
This is the hardware address assigned to the
network interface on the RMC-1. This address may
be requested by some routers in order to allow the
RMC-1 to access the Internet.
Firmware Version
This is the current version of the main RMC-1
firmware installed on your RMC-1.
FP Version
This is the current version of the Front Panel
firmware installed on your RMC-1.
Page 33