Emotiva RMC-1 Preliminary page 59

The RMC-1 Menu System
In Video on Standby Mode, turning the RMC-1 On using the rear panel Power switch will cause
it to first load the RMC-1 Operating System, then return to Standby Mode. (While the operating
system is loading, the halo ring around the Standby button will illuminate blue. Once the
operating system is loaded, the RMC-1 will drop into Standby Mode and the halo ring will
change to purple.) Since the operating system remains loaded while the RMC-1 is in Standby
Mode, switching between On and Standby Mode can then be accomplished very quickly.)
Firmware Update
Selecting Firmware Update instructs the RMC-1 to load a firmware update from the inserted USB
stick. After selecting Firmware Update you will be prompted to Confirm your choice. Use the Up
Arrow to confirm that you want to perform a Firmware Update, then the Left Arrow to start toe
update process. DO NOT TURN OFF YOUR RMC-1 UNTIL THE FIRMWARE UPDATE PROCESS HAS
COMPLETED!
Page 53