Table of Contents
Advertisement
Setup | Advanced Menu
Setup
Advanced
(menu)
The RMC-1 Menu System
Factory
Reset
Backup
Settings
Restore
Settings
Tuner
Region
Setup
Lock
Front
Buttons
Front
IR Blaster
Front
IR In
USB Audio
UAC2
Standby
Firmware
Update
The Setup Advanced Menu
allows you to configure
Con rm
various system operating
preferences, including
selecting a Standby Mode,
Con rm
and enabling various
controls and remote
control inputs and outputs.
Firmware updates, and
Con rm
resetting your RMC-1 to
factory defaults, are also
initiated from this menu.
Factory Reset
Selecting Factory Reset
clears all user settings
and returns the RMC-1 to
its factory defaults. After
selecting Factory Reset you
will be prompted to Confirm
your choice. To do so, check
the confirmation box, then
use the Left arrow key to
confirm the action.
Backup Settings
Selecting Backup Settings
instructs the RMC-1 to save
a copy of its configuration
file. After selecting Backup
Settings you will be
prompted to Confirm your
choice.
Note: If a USB stick is
inserted in the RMC-1,
the configuration will be
stored there. If no USB
stick is inserted, then the
Con rm
configuration will be stored
internally.
Page 50
Hide quick links:
Advertisement
Table of Contents
