Emotiva RMC-1 Preliminary page 20

16 channel dolby atmos and dts:x
Hide thumbs Also See for RMC-1:
Table of Contents

Advertisement

Stereo digital signals are presented directly to the processor.
Stereo analog input signals are converted to digital and passed to the processor.
Surround sound digital signals are decoded, and passed to the processor.
Multi-channel discrete digital signals (like multi-PCM) are passed directly to the processor.
All signals receive bass management - but no other processing.
If an LFE signal is present, and one or two subwoofers are also present, the LFE content
will be routed to the subs along with low-frequency content from the main channels
(as determined by the bass management settings).
Stereo Mode
Stereo Mode provides a full complement of processing and control options - with a stereo output.
In Stereo Mode:
The output is always TWO CHANNEL STEREO.
Bass management IS available and the subwoofer IS active.
Loudness Control, the Tone Controls, and the Tone Trims are active.
Dirac Live and the manual Parametric EQ Presets are active.
Level Trims are active.
Speaker Distance adjustments are available for both analog and digital inputs.
Stereo digital signals are presented directly to the processor.
Stereo analog input signals are converted to digital and passed to the processor.
Surround sound digital signals are decoded, down-mixed to stereo, and passed to the
processor.
Multi-channel discrete digital signals (like multi-PCM) are down-mixed to stereo and passed
to the processor.
If an LFE signal is present, and one or two subwoofers are also present, the LFE content
will be routed to the subs along with low-frequency content from the main channels
(as determined by the bass management settings).
All Stereo Mode
All Stereo Mode provides a full complement of processing and control options - with a stereo
output. In addition, the left signal is routed to all left side speakers and the right signal is routed to
all right side speakers for a "room filling" experience. In All Stereo Mode:
The output is always TWO CHANNEL STEREO - routed to all speakers.
The left channel is routed to all left side speakers; the right channel to all right side speakers;
and the center channel speaker receives a mix of left and right.
Bass management IS available and the subwoofer IS active.
Loudness Control, the Tone Presets, and the Tone Trims are active.
Dirac Live and the manual Parametric EQ Presets are active.
Level Trims are active.
Speaker Distance adjustments are available for both analog and digital inputs.
Operating the RMC-1
Page 14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents