Emotiva RMC-1 Preliminary page 48

Setup Menu
Setup
(menu)
Setup | Speakers Menu
The Speakers Menu is used to configure your speakers and room correction, including Dirac Live
automatic room correction and manual EQ using the RMC-1's built-in test tones and parametric
equalizers.
Setup | Inputs Menu
The Inputs Menu is used to configure each Input on the RMC-1, including the Input Name and
how the RMC-1 handles various types of input signals on each input
The RMC-1 Menu System
The Setup Menu allows you to view and change
Preferences
the main configuration settings for the RMC-1.
(menu)
Setup | Preferences Menu
The Preferences Menu is used to configure
various system operating preferences, including
Triggers
Max Volume, Turn-On Volume and Input, and the
(menu)
behavior of the OSD pop up.
Setup | Triggers Menu
HDMI CEC
The Triggers Menu is used to configure the
(menu)
behavior of the RMC-1's four independent
triggers.
Setup | HDMI CEC Menu
Network
(menu)
The HDMI CEC Menu is used to configure how the
RMC-1 participates in sending and receiving CEC
commands.
Advanced
Setup | Network Menu
(menu)
The Network Menu is used to configure various
network parameters for the RMC-1.
Speakers
Setup | Advanced Menu
(menu)
The Advanced Menu allows you to configure
various system operating preferences, including
selecting a Standby Mode, and enabling various
controls and remote control inputs and outputs.
Inputs
(menu)
Firmware updates, and resetting your RMC-1 to
factory defaults, are also initiated from this menu.
Page 42
.