Emotiva RMC-1 Preliminary page 77

Rear Panel - Main Analog Audio Output
FM AM
ANALOG IN BALANCED ANALOG IN
1
R L
2
R
R L
RMC-1
3
RRHt RFHt RBk RSur
RRHt RFHt RBk
1. Main Audio Outputs (balanced)
Connect these line level outputs to one or more external power amplifiers.
Note: All of the analog audio outputs on the RMC-1 offer balanced XLR connections. Many
modern high quality power amplifiers offer balanced input connections. Tthe balanced input
is preferred for any amplifier that offers both types of inputs. If one or more of your amplifiers
offers only unbalanced inputs, then a set of standard low-cost balanced-to-unbalanced
adapters can be used to allow you to connect unbalanced RCA interconnect cables to the
RMC-1, or you can purchase adapter cables with a balanced XLR connector on one end and an
unbalanced RCA connector on the other.
2. Subwoofer/Height Outputs (balanced)
Connect a single subwoofer to the Center Subwoofer output.
The other two Subwoofer outputs may be used to connect either two more subwoofers, or a pair
of Center Height speakers, depending on how they are configured in the Setup Menu.
Note: The RMC-1 supports up to three subwoofers; each of which recieves the same monaural
LFE and low frequency content. The left, right, and center designations are provided strictly to
aid in identifying each subwoofer by connection and room location.
Connecting the RMC-1
8 7 6
DIGITAL OUT
4 3
L
RWid RF CTR LF
RSur RWid RF CTR
1
HDMI
5 4 3 2
DIGITAL IN AES/EBU IN
2 1
ZONE2 OUT
LWid LSur LBk LFHt
LF LWid LSur LBk
Page 71
HDMI
1 1 2/ARC
NETWORK IR IN TRIGGER OUT
1 2
3 4
IR OUT
LRHt RSub/Ht CSub LSub/Ht
LFHt LRHt RSub/Ht CSub LSub/Ht
2