Emotiva RMC-1 Preliminary page 47

Zone 2 Menu
Zone 2
(menu)
The Zone 2 Menu contains the settings and controls typically used to control the second audio
zone in the day-to-day operation of your RMC-1. These are settings that are typically chosen each
time when viewing content.
Power
The Power check box is used to turn Zone 2 On and Off from the menu system. Zone 2 can also be
turned On and Off directly from the remote control.
Input
The Input control is used to select which input on the RMC-1 to listen to or view.
Note: On the RMC-1, the Zone 2 Input is selected independently from the main zone. ANY input
that is currently selected as the Main Zone Input can also be routed to the Zone 2 Input - by
selecting Follow Main. If you wish to set the Zone 2 Input to a different source than the main
zone, you will be able to select ANALOG sources, and 2 CHANNEL PCM DIGITAL sources. You will
NOT be able to select a different digital surround sound or HDMI source for the Zone 2 Input
than is selected for the Main Zone.
Note: The halo ring on the front panel Standby button will flash alternating blue and amber to
remind you when Zone 2 is On.
Note: If the Video On Standby feature is enabled, or the Main Zone is already On, Zone 2 will
respond very quickly when turned On. If the Video On Standby feature is disabled, and the
RMC-1 Main Zone is Off, then the RMC-1 will have to load its operating system when Zone 2 is
turned On, which may take up to one minute
Volume
The Volume control is used to control the level of the Zone 2 output from the menu system. Zone
2 Volume can also be set directly from the remote control.
The RMC-1 Menu System
Power
Input
Volume
Input
List
Page 41