Emotiva RMC-1 Preliminary page 32

The front panel of the RMC-1 is dominated by a pair of large, bright, easy to read blue OLED
displays. The displays can be set to any of six different brightness levels, including totally off. If the
display is fully dimmed, it will illuminate for a few seconds when you press the Info button, and,
when you activate the Menu, the display will illuminate for as long as you are using the Menu.
HDMI 1
Setup
Volume
The information diaplayed on each screen can be configured in the Setup | Preferences menu.
By default, the front panel display shows three lines of detailed information about the source
that is currently selected, and the audio and video modes currently in effect. When you operate a
direct control, like the Volume knob or buttons, or one of the Input selector buttons, the display
will momentarily switch to a large, easy to read, representation of the item being chosen or
adjusted. When you use the Menu System, the display will switch to show that, then return to the
Information screen when you exit the Menu. When using the Setup Menu, settings made on any
screen are automatically updated or saved when you exit the screen.
For all menus except the Setup Menus, the on screen display will show the same content as the
front panel display. In the Setup Menus, if a certain menu screen displays a list of more than three
items, the front panel display will show the current item and a single item above and below it,
while the on-screen display shows the entire list of items. Also, in the Setup Menu, certain menus
show additional useful information on the OSD version (like the user defined name of the Presets).
The RMC-1 Menu System
HDMI 1
A: HDMI 1
V: HDMI 1
-35.0dB
FM 104.90MHz
Mono 0dBuV
V: HDMI 1
Page 26
Volume -35.0dB
Surround
PCM 7.1
48kHz 24bits
1920x1080p/60 RGB 8bits
Volume -35.0dB
Surround
1920x1080p/60 RGB 8bits