Related Drive Parameters - YASKAWA CC-Link Installation Manual

6 Related Drive Parameters

6 Related Drive Parameters
The parameters in Table 7
of all parameters in
packaged with the drive for details on setting parameters.
No. INV CNV
b1-01
 –
<1>
b1-02
 
<1>
b1-18
– 
<2>
F6-01
 
<3>
F6-02  
32
set the drive for operation with the option. Confirm proper setting
Table 7 before starting network communications. Refer to the manual
Table 7 Parameter Settings
O: Applicable, –: Not applicable, INV: Drive, CNV: Energy-Saving Unit
Name
Reference 1 Source
Run Command 1 Source
Voltage Reference Source
Communications Error
Selection
Comm External Fault
(EF0) Detect
YASKAWA ELECTRIC TOBP C730600 83C YASKAWA AC Drive Option SI-C3 Installation Manual
Description
Selects the input method for frequency
reference.
0: Keypad
1: Analog Input
2: Memobus/Modbus Communications
3: Option PCB
4: Pulse Train Input
Selects the input method for the Run
command.
0: Keypad
1: Digital Input
2: Memobus/Modbus Communications
3: Option PCB
Selects the voltage reference input source.
0: Digital Operator - RUN and STOP keys
1: Analog input
2: MEMOBUS/Modbus communications
3: Option PCB
7: Input voltage based control 1
8: Input voltage based control 2
Selects drive response when a bUS error is
detected during communications with the
option.
When installed to drives:
0: Ramp to stop.
1: Coast to stop.
2: Fast Stop (Use C1-09)
3: Alarm only.
<3>
4: Alarm - Run at d1-04
5: Alarm - Ramp to Stop
When installed to energy-saving units:
1: Stop
3: Alarm Only
Selects the condition for external fault
detection (EF0).
0: Always detected.
1: Detection during run only
Values
Default: 1
Range: 0 to 4
Default: 1
Range: 0 to 3
Default: 8
Range: 0 to 3, 7,
8
Default: 1
Range: 0 to 5
<5>
<3> <4>
<4>
Default: 1
Range: 1, 3
Default: 0
Range: 0, 1
–