Installation Guide Linear Motors
6.4.2
Mounting
Option A
360°
Item
Description
PA10-70/28
Lubricant depot for PS10-70 with wiper + lubricant (6 ml)
Important! Mounting kit must be ordered separately.
Page 24 / 41
1. Insert bearing tube.
Bearing tube is already lubricated with initial lubricant.
2. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
3. Assemble lubricant depot (back).
The lubricant depot, the seal and the wiper are assembled
and positioned on the stator.
4. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
5. Insert lubricant depot (front).
Assemble the lubricant depot with the wiper and tighten it
with fastening screws (2.4 Nm torque). Screws are already
coated with threadlocker (Tuflok).
6. Lubrication
Application of the lubricant on the surface behind the used
Option B
wiper (Option A) or via the grease nipple with a hand press
(Option B).
P10-70 / P10-70-D01/02/03
ENG
Item-No.
0150-3543
NTI AG / LinMot