Installation Guide Linear Motors
Slider back end (M8 thread)
When attaching the load, the wrench for tightening the load must be used only on the load-
facing side of the slider. Avoid torsional stress on slider (note the following figures).
Slider
Thread
M 8 (Slider back end)
28 mm
M 10 (Slider front end)
NTI AG / LinMot
Incorrect attachment
Torsional stress on slider!
Correct attachment
P10-70 / P10-70-D01/02/03
Slider front end (M10 thread)
Max. torque for screw
(Dry)
22.5 Nm
42 Nm
ENG
Page 9 / 41