Mounting - LinMot P10-70 Installation Manuals

Installation Guide Linear Motors
6.3.2

Mounting

The bearing sets for the stators PS10-70 can be found under
zubehör/.
Page 22 / 41
1. Insert bearing tube.
Bearing tube is already lubricated with initial lubricant.
2. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
3. Assemble end piece (back).
The end piece, the seals and the wiper are assembled and
positioned on the stator.
4. Tighten the fastening screws with 2.4 Nm.
Screws are already coated with threadlocker (Tuflok).
5. Option A: Assemble end piece (front).
Assemble the end piece with the wiper and tighten it with
fastening screws (2.4 Nm torque). Screws are already
coated with threadlocker (Tuflok).
5. Option B: Exchange wiper.
Important! For motors with casted end piece only the wiper
has to be exchanged!
P10-70 / P10-70-D01/02/03
http://shop.linmot.com/D/linearmotoren-
ENG
NTI AG / LinMot