BCDVideo BCD-RGD-804P-MT User Manual page 9

Click "Add Interface" Add a new IP interface.
IP router = Interface items introduction:
Interface items Configuration
Delete Select / not selected
Network IP address
Mask Length 1-32
that must match, 24
in order to qualify
for this route.
Gateway IP
Click "Add Router" to add a new IP route interface.
C. SNTP Time Server Configuration
Enter [System] → [SNTP] Navigation, Time server configuration page, can be turned on when the remote NTP server,
and configure remote SNTP time server, click [Save] button to complete time server configuration.
Interface items introduction:
Interface items Configuration
Mode Disable/Enable
Server Address Time server IP address Provide the IPv4 or IPv6 address of a NTP server.
BCD-RGD-804P-MT
Introduction
Select this option to delete an existing IP route.
The destination IP network or host address of this
route. Valid format is dotted decimal notation or a
valid IPv6 notation. A default route can use the value
0.0.0.0 or IPv6 :: notation.
The destination IP network or host mask, in number of
bits (prefix length). It defines how much of a network
address
The IPv4 address of the interface in dotted decimal
notation.
The IP address of the IP gateway.
Introduction
Indicates the NTP mode operation.
Factory Setting
not selected
NO
not selected
192.168.0.240
No
Factory Setting
Disable
No
9