BCDVideo BCD-RGD-804P-MT User Manual page 20

E. SNMP Group Configuration
Enter [SNMP configuration] → [Groups] navigation column, configure SNMPv3 group table on this page, This function is used
to set some of these groups and the security model, the authentication name. The Page Setup group, as can select use group
in Snmp-Access (Snmp Access Settings) page, out in option "Group Name" column, the configuration options for the user to
use Snmp access.
Interface items Introduction:
Interface items Configuration
Security Model
v1/v2c/usm
Security Name
Public/Private
Group Name 0-255 byte
Default_rw_group
F. SNMP View Configuration
Enter [SNMP configuration] → [Views] navigation column, Configure SNMPv3 view table on this page. The main configuration
items are: the view name, OID subtree, include or exclude the OID subtree.
20
Introduction
SNMP group safety mode
SNMP group access permission public permission, private permission, default
SNMP group name
BCD-RGD-804P-MT
Factory setting
v1 group, v2c group, usm group
user permission
Default_ro_group
www.bcdvideo.com